EX-NEXT Manual

18
●RFMode(Radio waves mode)
EX-NEXT has 3 mode of radio method.
●RF mode
ADV: This is highest speed response in same category device. This give absolute advantage when using in the race.(*1)
TLMY: In the this mode, you can use telemetry/REAL TIME ICS.(*2)
You can know value of the each sensor from the receiver. You can adjust ICS settings of the servo through the transmitter.
MX-F: This mode is for using MR-8 receiver.
Please return RF mode to "MX-F" after change RF mode to "TLMY" and change response to the"MILD"(p.37-38)
*1: As of January 2021
*2:The telemetry function is able to use serial communication corresponded servo or device only.
How to use KR-420XT with MC-8.
Please set “TLMY” for the RF mode and set “MILD” for response function when using with
EX-NEXT. Then pair this receiver with MC-8.
Communication
Specifications
RF Mode
Width
of
Frequency
Initial Screen
Display
Compatible
Receivers
LED
Telemetry
XT Advance
Highest speed
one way communication
ADV
GENERAL FRANCE
XT-ADG XT-ADF
KR-420XT
Green
Green
Flashing
Do not Correspond
XT Telemetry
Middle speed
two way communication
TLMY
GENERAL FRANCE
XT-TMG XT-TMF
KR-420XT
Blue
Blue
Flashing
Correspond
MX-F
Slowest speed
one way communication)
MX-F
GENERAL FRANCE
MX-FG MX-FF
Yellow
Yellow
Flashing
MR-8
Do not Correspond
This parameter can change value of the communication pattern of the EX-NEXT and receivers.
If you have direction by administrator of the track etc, please use France mode. Usually, please
use the General mode.
What is France (France mode) width setting?
Please do pairing function when the RF MODE is changed. (p.19)
P
P
P