EX-NEXT Manual

ManualsBrandsKO Propo ManualsBoatsEX-NEXT 2.4GHz Radio System w/KR-420XT Receiver (Short)

Table Of Contents

MODELSEL セレクト

MODELモデル

MODELNAME ネーム

RESET リセット

COPY コピー MDL01 TO

MDL02

ABCDEFGH

MDL01

MODEL SELECT　

MODEL

MODEL NAME

MODEL RESET

MODEL COPY　MDL01 TO MDL02

ABCDEFGH

MDL01

MODELSEL セレクト

MODELモデル

MODELNAME ネーム

RESET リセット

COPY コピー MDL01 TO

MDL02

ABCDEFGH

MDL01

MODEL SELECT　

MODEL

MODEL NAME

MODEL RESET

MODEL COPY　MDL01 TO MDL02

ABCDEFGH

MDL01

FUNCTION

MODEL

3 - 8CH

TIMER

KEYSET

TLMY

SYSTEM

MODELSEL セレクト

MODELモデル

MODELNAME ネーム

RESET リセット

COPY コピー MDL01 TO

MDL02

ABCDEFGH

MDL01

MODEL SELECT　

MODEL

MODEL NAME

MODEL RESET

MODEL COPY　MDL01 TO MDL02

ABCDEFGH

MDL01

. . . 4S WAIT . . . .

RF MODE HAS CHANGED

MONITOR XT-TMG DR5.8V

MODEL NO.01

STEERING

THROTTLE

FUNCTION

STEERING

THROTTLE

MODELSEL セレクト

MODELモデル

MODELNAME ネーム

RESET リセット

COPY コピー MDL01 TO

MDL02

ABCDEFGH

MDL01

MODEL SELECT　

MODEL

MODEL NAME

MODEL RESET

MODEL COPY　MDL01 TO MDL02

ABCDEFGH

MDL01

FUNCTIONFUNCTION

MODEL

Save various settings as model memories Up to 50

model memories can be named and stored.

Select the model number and press ENT to blink the cursor.

After changing the model with the arrow keys, press ENT to

conrm.

* If the RF mode of the changed model is different, the following

screen will be displayed. (It will close automatically after 4 seconds.)

Return to the FUNCTION menu to complete the change.

MODEL SEL (Model Select)

Switch between different model memories.

MODEL NAME

Names the model memories.

MODEL COPY

Copies model memory.

MODEL RESET

Reset model memory.

ALL RESET

Resets all model memorie

Switch between different model memories.

Setting Range MODEL 01- 50

MODEL SELECT

Select the model to be used.

All of the various settings are registered under a model memory.

Switching model memory while driving may cause setting

mismatches and lead to an uncontrollable model. Please place the

car on a stand or switch it off before switching model memories.

When the model memory number was changed, the information

such as communication method and trim was not changed.

You can use the model by returning to the FUNCTION menu.

After changing models and the RF mode is different, please

perform the pairing with the receiver again.

Example

If you have multiple cars, it is convenient to have a separate

model memory for each one. Even in the case of only one car,

you could save specic settings for different courses as different

model memories as well.

The settings which will be switched by Model Select are...

1) Steering setting

2) Throttle setting

3) 3-8ch setting

4) RF,resonse mode setting

5) Steering and Throttle Response

6) Steering and Throttle Feel

7) Key setting

8) Stop watch setting

This function is used to name the model memory that is

currently in use. Distinguish each model memory with different

names, which may also be edited. The set model name will be

displayed on the initial screen and model select screen.

MODEL NAME

Press Back key

If "4S WAIT" is displayed, perform pairing with the receiver.