EX-NEXT Manual

MODELSEL セレクト
MODELモデル
MODELNAME ネーム
RESET リセット
COPY コピー MDL01 TO
MDL02
ABCDEFGH
ABCDEFGH
MDL01
MODEL SELECT
MODEL
MODEL NAME
MODEL RESET
MODEL COPY MDL01 TO MDL02
ABCDEFGH
ABCDEFGH
MDL01
MODEL
MDL01
ABCDEFGH
ABCDEFGH
MDL02
MODEL01
MODEL02
COPYOK?
TO
02'(/
02'(/5(6(72."
ENGLISH
①
①
②
JAPANESE
②
02'(/
28
MODEL COPY
Copies the current model memory to a different model
memory.
Setting range
MODEL : 01- 50
Deleted data cannot be recovered. Be careful to avoid undesired
resets.
The RF mode is changed to the default value of TLMY.
Please operate pairing function with the receiver again.
The contents of the model memory that is being copied to will be
overwritten. Overwritten data cannot be recovered, so be careful
to avoid undesired memory overwrites.
Example
When changing settings on the same car to match driving
conditions, it is convenient to copy the original memory
before modifying it. This function also allows you to try out
new settings while keeping your original one.
Select the model memory to copy to, then hold the ENT key
to copy.
Small window [RESETOK?] is displayed, then push the
ENTER key. Press BACK key to cancel.
Press the ENTER key to copy memory. Press the BACK key
to cancel the copy.
The settings which will be switched by Model Copy are...
1) Steering setting
2) Throttle setting
3) 3-8ch setting
4) RF,resonse mode setting
5) Steering and Throttle Response
6) Steering and Throttle Feel
7) Key setting
8) Stop watch setting
P
MODEL
MODELSEL セレクト
MODELモデル
MODELNAME ネーム
RESET リセット
COPY コピー MDL01 TO
MDL02
ABCDEFGH
ABCDEFGH
MDL01
MODEL SELECT
MODEL
MODEL NAME
MODEL RESET
MODEL COPY MDL01 TO MDL02
ABCDEFGH
ABCDEFGH
MDL01
MODEL RESET
Return the current model memory to default factory setting
values.
Select [RESET] (hold ENTER key) to reset.
Setting Range Maximum 16 characters.
<Available charactors>
To delete a character, overwrite the character to be deleted by
using the blank space at the end of each page of characters.
P
Characters inside the dotted lines are only available when
Japanese language has been selected.
P
Choose one character at a time from the left side.