EX-NEXT Manual

32
FUNCTION
MODEL
3 - 8CH
TIMER
KEYSET
TLMY
SYSTEM
START:POS1
３CHMODE:2WAY
KEY:OFF
NOW:0
+
ー
POS1:0
POS2:100
３CHMODE
3-8CH
４CHMODE
GYRO
TWIN
４WS
AMP
T-MIX
>>NEXT
OFF
2WAY
3WAY
5WAY
ANLOG
５WAY
SET
２WAY
SET
3-8CH
Settings related to 3CH - 8CH operations.
The MODE of 3-8CH selected from the right.
Change the setting of the item chosen with the SET key.
The current output position is displayed by “NOW”
and shown on the bar graph.
The current output position is displayed by “NOW”
and shown on the bar graph.
The functions which may be set are the same for both 3CH and
4CH. In 5-8CH are able to select limited functions.
However, setting method are same.Set them to match the desired
purpose.
P
P
P
2WAY
Modify the 2-interval output settings.
Setting Range
START POS1, POS 2(Default:POS 1)
Sets the starting position.
KEY:OFF ET1 - 5(Default:OFF)
Assigns a key to use for switching positions.
POS 1:-100 - 100(Default:0)
Sets Position 1's output position.
POS 2:-100 - 100(Default:100)
Sets Position 2's output position.
Default
3CH MODE : 5WAY
4 to 8CH MODE : 2WAY
<Function List>
MODE
<Only 3,4CH can use>
GYRO
TWIN
4WS
AMP
T-MIX
Example
May be used to activate/deactivate an engine starter
unit or a semi-trailer's support legs.
START:POS1
3CHMODE:3WAY
KEY:ET3
+
ー
POS1:-100
POS2: 0
POS3:100
NOW:0
3WAY
Modify the 3-interval output settings.
Example
May be used for gear changing operations or when you wish to
set a 3-interval control scheme for the servo.
Setting Range
START : POS 1, POS 2, POS 3(Default: POS2)
Initial position is congurated
KEY : OFF, ET1 - 5(Default: OFF)
Assigns a key to use for switching positions
POS 1 : - 100 - 100(Default : - 100)
Sets Position 1's output position.
POS 2 : - 100 - 100(Default : 0)
Sets Position 2's output position.
POS 3 : - 100 - 100(Default : 100)
Sets Position 3's output position.
SET
Set the usage choice for channels 3-8 modes
< 3-8CH can use>
OFF
2WAY
3WAY
5WAY
ANLOG
3-8CH
3-8CH
3-8CH
3

・
4CH