EX-NEXT Manual

37
FUNCTION
MODEL
3 - 8CH
TIMER
KEYSET
TLMY
SYSTEM
TELEMETRY
RELICS
BT F/S
RESP
RFMODE
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
RF MODE
RF MODE:
WIDTH :
TLMY
GENERAL
PAIRING
RF mode
WIDTH
Change RF mode, Pairing, Take data from receiver, Fail safe,
Real Time ICS( Servo setting) are able to operated.
Operate RF mode change and Pairing Setting.
Switch between general / French mode.
TLMY Telemetry
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
RF MODE
RF MODE:
WIDTH :
TLMY
GENERAL
PAIRING
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
RF MODE
RF MODE:
WIDTH :
TLMY
GENERAL
PAIRING
Setting Range
RFMODE : ADV/TLMY/MX-F (Default : TLMY)
Setting Range
WIDTH : GENERAL/FRANCE (Defaulet : GENERAL)
This is a change in the communication pattern between
the EX-NEXT and the receiver. When instructed by a track
administrator, please use the French mode, otherwise please
use the general mode.
What is France mode in the Width setting.
P
PAIRING
Pairing with the receiver.
Move the cursor to Pairing and press and hold the ENTER key.
The display will change to the Pairing screen and will begin to
send the radio wave for Pairing.
Please refer to page 19 for the Pairing operation.
Please you must perform the pairing operation (
p.19
)
with the receiver when you change the RF mode.
Telemetry / REAL TIME ICS functions are available only for
devises which are connection to B/S port of the corresponding
receiver. Traditional servos/ESC/battery connections to 1-4CH
terminals will not work.
Except TLMY mode, displayed only RF mode and RESP,RELICS,
BT F/S are not displayed.
EXIT >> BACK KEY!