EX-NEXT Manual

44
KEYSPEED
Set the interval at which the operation repeats when the L /
R keys are held down.
KEYSPEED : OFF to 5(Default : 3)
MENUSPEED
Set the interval at which the operation is repeated when the
L / R keys are held down when moving the menu.
MENUSPEED : OFF to 5(Default : 3)
LANGUAGE
Switches the menu display language.
LANGUAGE : ENGLISH / JAPANESE
(Default : ENGLISH)
OPERATIONTIME
A warning buzzer sounds when the set time is exceeded
for no operation. The alarm is canceled by operating the
steering wheel / throttle trigger, ET key, BT key, ENT key, L /
R key, and BACK key.
OPERATIONTIME : OFF to 3min
(Default : 3)
USERTIMER
The time when the power is turned on is integrated and
displayed.
KEYSPEED
ｷｰｿｸﾄﾞ
3
MENUSPEED
ﾒﾆｭｰｿｸﾄﾞ
3
KEYSPEED ｷｰｿｸﾄﾞ
.(<63(('

0(1863(('
/$1*8$*(
23(5$7,217,0(
86(57,0(5
(/3$66('7,0(

&21),*
(1*/,6+
0
ڳ+0
ڳ+0
CONFIG
DATA
Change the operating environment settings of the Xpansion
unit.
It is not reected in the ET and BT keys, and the set value is xed.
Be sure to turn on the power of EX-NEXT before connecting the
ICS USB adapter HS and the expansion unit.
SYSTEM
Setting Range
Setting Range
Setting Range
Setting Range
If the set value is OFF, the operation will not be repeated. The
larger the setting, the shorter and faster the repeat interval.
Language switching is applied after moving from the CONFIG
screen to the SYSTEM screen with the BACK key.
The ELPASSED TIME timer cannot be reset.
You can reset the timer by moving the cursor to USERTIMER and pressing and
holding the ENT key.
P
P
P
P
<Function list>
ELPASSEDTIME
The time when the power is turned on is integrated and
displayed.
Reads and writes model data.
SYSTEM 2/2
RESETDATA
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
MODEL DATA EDIT
PLEASE CONNECT
ICS-USB ADAPTER TO
COMMUNICATION PORT
ON THE FRONT OF
XPANSION.
START
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
READ EX-NEXT＞＞＞PC
WAIT PC >>>EX-NEXT
EXIT >> POWER OFF
1. Press the ENT button on START to switch
to the communication screen and enter the
communication standby state.
2. Connect the communication cable of the ICS
USB adapter HS to the communication port of
the expansion unit.
3. Open "EX-Manager Ver2.0" on your PC and
save and write the model data.