EX-NEXT Manual

49
67((5,1*
75$9(/
'<1$0&
75,0
)((/
5(9(56
63(('
STTURN 100
%
STRETURN100
%
ﾀｰﾝｽﾋﾟｰﾄﾞ
ﾘﾀｰﾝｽﾋﾟｰﾄﾞ
STSPEEDスピード
7851




6763(('
326
7851
7851
5(7851
326
5751
5751








ST SPEED
Modify the speed of the steering servo movement.
TURN POS Steering Turn Position
The range of movement of the steering wheel for TURN1
and TURN2 speed settings can be set.
TURN 1 Steering Turn Speed 1
The speed from neutral to TURN POS range of the steering
wheel movement is set.
TURN 2 Steering Turn Speed 2
The speed from TURN POS to end point range of the
steering wheel movement is set.
RETURN POS Steering Return Position
The range of movement of the steering wheel for returning
to neutral for RTRN1 and RTRN2 speed settings can be set.
RTRN 1 Steering Return Speed 1
The speed of the return from RETURN POS to neutral of
the steering is set.
RTRN 2 Steering Retuen Speed 2
The speed of the return from end point range to RETURN
POS of the steering is set.
ST RETURN
This is the function which restricts the maximum speed of the
steering servo returning back to neutral.
You congure the direction (RETURN) of the steering
movement.
Setting Range
TURN POS : 1 to 100% (Default: 50%)
TURN 1 : 1 to 100% (Default: 100%)
TURN 2 : 1 to 100% (Default: 100%)
Setting Range
RETURN POS : 1 to 100% (Default: 50%)
RETURN1 : 1 to 100% (Default: 100%)
RETURN2 : 1 to 100% (Default: 100%)
Example
When the behavior of the car steering is hard to
handle, reducing the operational speed can allow the
operation of steering to become easier.
Take into account such factors as the servo used, car, driving
surface, etc. when adjusting all settings. Conduct test drives to nd
the best setting values.
P
Take into account such factors as the servo used, car, driving
surface, etc. when adjusting all settings. Conduct test drives to nd
the best setting values.
P
Effective speed values are dependent on the speed characteristics
of your selected servo.
P
When setting POS=100%, TURN2 cannot be set because POS is
now the entire movement range.
P
When setting POS=100%, TURN2 cannot be set because POS is
now the entire movement range.
P
Effective speed values are dependent on the speed characteristics
of your selected servo.
P
ST TURN
This is the function which restricts the maximum speed of
the steering servo. You congure the direction (TURN) of the
steering movement.
Neutral
End point
Turn1 speed range
TURN POS
Turn2 speed range
End point
Neutral
Return1 speed range
Return2 speed range
RETURN POS
Full Lock
Neutral
Full Lock
Neutral
Begin Turn Return
Wheel
Operation
Wheel
Operation
Quick
Operations
Different values will affect the graph's appearance
Servo Speed
Speed
Position
Servo Movement
Elapsed Time
Elapsed Time