EX-NEXT Manual

▶MaximumThrottle
▶Neutral
RETURN L Speed
RETURN M Speed
RETURN H Speed
TURN M>L
TURN H>M
Operation of the Return Speed
▶Maximum Throttle
▶Neutral
TURN LSpeed
TURN M Spee d
TURN HSpeed
TURN L>M
TURN M>H
Operation of Turn Speed
54
THROTTLE 1/3
DYNAMC
TRIM
FEEL
TRAVEL
REVERS
SPEED
THTURN 100
%
THRETURN100
%
ﾀｰﾝｽﾋﾟｰﾄﾞ
ﾘﾀｰﾝｽﾋﾟｰﾄﾞ
THSPEEDスピード
7851


7851/


7+63(('
/!0
0!+
78510
7851+
 
 
 
5(7851
5751+


+!0
0!/
57510
5751/
 
 




TH SPEED
It give limit to speed in the throttle.
TURN L>M
The range of movement of the throttle for L and M speed settings
can be set.
TURN M>H
The range of movement of the throttle for M and H speed settings
can be set.
TURN L
Speed from neutral ~ TURN L of the throttle can be slowed down.
TURN M
Speed from TURN L ~ TURN M of the throttle can be slowed
down.
TURN H
Speed from TURN M ~ TURN H of the throttle can be slowed
down.
RETURN H>M
Speed of the return of the throttle from H ~ M can be slowed down
in this range.
RETURN M>L
Speed of the return of the throttle from M ~ L can be slowed down
in this range.
RTRN H
The return speed of the range for H ~M can be set.
RTRN M
The return speed of the range for M ~L can be set.
RTRN L
The return speed of the range for L ~neutral can be set.
This function delays the conversion of the throttle control signal
to make the car easier to control.
This function delays the conversion of the throttle control signal
to make the car easier to control.
*Throttle return speed is effective in the range of the throttle
going from the high point to neutral.
Setting Range
TURN L>M : 1 to 100% (Default : 30%)
TURN M>H : 1 to 100% (Default : 80%)
TURN L : 1 to 100% (Default : 100%)
TURN M : 1 to 100% (Default : 100%)
TURN H : 1 to 100% (Default :100%)
Setting Range
RETURN H>M : 1 to 100% (Default : 80%)
RETURN M>L : 1 to 100% (Default : 30%)
RETURN H : 1 to 100% (Default : 100%)
RETURN M : 1 to 100% (Default : 100%)
RETURN L : 1 to 100% (Default : 100%)
TH TURN
TH RETURN
Effective speed values are dependent on the speed characteristics
of your selected servo.
When the setting is set to have TURN L>M and TURN M>H to the
same value, TURN M is displayed as OFF and is not available
to set. In this case only TURN L and TURN H settings becomes
effective
When TURN L>M = 100% conguration is set, TURN M and TURN
H are displayed as OFF and are not available to be set. In this
case only TURN L will be used for the setting since it is the largest
value.
P
P
P
Return speed is null in the operating range of the brake.
TH FEEL B (
p.56
) is used t o ad just the brake feeling.
P
Effective speed values are dependent on the speed characteristics
of your selected servo.
P
Example
If the car spins or otherwise does not drive straight when the
throttle is applied suddenly, limiting the throttle speed can be
effective.
Example
If the car spins or otherwise does not drive straight when the
throttle is applied suddenly, limiting the throttle speed can be
effective.