EX-NEXT Manual
Table Of Contents
Servo Movement angle
Trigger Operation
At +100
At 0
At -100
Neutral Full Middle
Mild
Quick
Neutral Middl
eF
ull
Servo Movement Angle
Trigger Operation
At 0
At 50
55
THROTTLE 1/3
TRIM
FEEL
TRAVEL
REVERS
SPEED
DYNAMC
CURVE
%
PUNCH
%
ｶｰﾌﾞF
ﾊﾟﾝﾁF
0
０N
FB
ｶｰﾌﾞB
ﾊﾟﾝﾁB
%
０
%
０
THDYNAMICSダイナミクス
&859()
&859(%
381&+)
ڬ
ڬ
ڬ
7+'<1$0,&6
381&+%
DYNAMC
Set the operating characteristics of the throttle.
CURVE F Throttle Curve Forward
Modify the movement speed ratio which corresponds to how
much throttle is applied.
CURVE B Throttle Curve Brake
Modify the movement speed ratio which corresponds to how
much throttle brake is applied.
PUNCH F Throttle punch Forward
Modify how much the throttle initially accelerates from neutral
position.
PUNCH B Throttle punch Brake
Modify how much the brake initially accelerates from neutral
position.
This function sets the signal conversion rate to a curve to
enable quicker or milder response. Likewise, braking can also
be set to a braking curve.
This function quickens the throttle's initial response and can be
used to instill a sense of power when the throttle initially moves
from neutral.
Setting Range
TH CURVE F : -100 to 0 to 100%
(Default : 0%)
TH CURVE B : -100 to 0 to 100%
(Default : 0%)
Setting Range
TH PUNCH F : 0 to 50%
(Default : 0%)
TH PUNCH B : 0 to 50%
(Default : 0%)
CURVE
PUNCH
When [Throttle Punch] is activated, the characteristics of the
throttle curve value is also added to the Throttle Punch value.
The larger the value, the larger the amount of throttle movement.
However, depending on other settings, the throttle operation may
become jagged.
When using this in conjunction with other functions, adjust one at a
time to conrm their effects to produce an effective overall setting.
This function adjusts only the curve. Use the [Throttle Punch]
function if you wish to adjust the initial response.
Positive values (+1 to +100) equal high initial response followed by
mild response.
Negative values (-1 to -100) equal a mild initial response followed
by high response.
If using this in conjunction with other functions such as [Throttle
ABS], conrm the operation before using.
P
P
P
P
P
P