EX-NEXT Manual

60
THROTTLE 2/3
OFFSET
ATSTRT
BRK-OR
H-BRK
BRK-IN
CYCLE
KEY
キー
0FF
BRAKE
ﾌﾞﾚｰｷ
１００
STTRAVEL
STﾄﾗﾍﾞﾙ
１００
OVERRIDEｵｰﾊﾞｰﾗｲﾄﾞ
.(<
))
%5$.(
ڭڬڬ
6775$9(/
ڭڬڬ٫
67759/
ڬ٫
677595
ڬ٫
29(55,'(
OVERRIDE BREAK-IN
Arrange another maximum brake setting and steering travel
setting, which can be activated/deactivated by the ET lever or
BT button.
KEY
Assigns a key to be used to activate/deactivate the
override.
BRAKE
Sets the brake override's brake setting.
ST TRAVEL
ST TRV L
ST TRV R
Adjust the steering angle according to the driving
conditions to make the car easier to control.
KEY
Set the key to operate start / stop break-in function.
RUNTIME
Sets the break-in function operation time.
FORWARD
Sets the operation amount of the break-in function.
Setting Range
KEY : OFF, ET1 to 5, BT1 (Default: OFF)
BRAKE : 0 to 150 (Default: 100)
ST TRAVEL : 0 to 150 (Default: 100)
Setting Range
KEY : OFF, ET1 to 5, BT1 (Default: OFF)
RUNTIME : 1 to 240 (Default: 5)
FORWARD : 0 to 50 (Default: 10)
If you want to switch the setting value only for the brake override,
the steering travel override value is also valid at the same time.
If you do not want to change the steering travel value, enter the
same value for steering travel and steering travel override.
It is a convenient function for agitating the oil of the gear
differential and rings of a ball differential before starting to run.
Please adjust the set amount of RUNTIME and FORWARD
according to your preference.
P
P
Example(Brake over ride)
Switch to the throttle brake value while driving when the road
surface conditions are expected to change.
Example (Steering travel over ride
This is convenient when you want to stabilize the straight line
by reducing the steering amount when driving in a straight line
with an oval car.
[OR] Display on the Function Monitor!
When the override is enabled by operating the key assigned by
[KEY], "OR" is displayed on the function monitor on the initial
screen. If [KEY] is turned OFF while "OR" is displayed on the
function monitor of the initial screen, the display of "OR" on the
function monitor of the initial screen also disappears.
P
THROTTLE 2/3
OFFSET
ATSTRT
BRK-OR
H-BRK
BRK-IN
CYCLE
STREVERSE
THREVERSE
ｽﾃｱﾘﾝｸﾞﾘﾊﾞｰｽ
NORM
ｽﾛｯﾄﾙﾘﾊﾞｰｽ
NORM
REVERSEリバース
.(<
5817,0(
)25:$5'
2))

6
%5$.(,1
Fix the throttle operation for the set time.
When the break-in function is activated, the buzzer will continue to
ring.
You can forcibly stop by pressing the KEY set while the break-
in function is in operation.