User's Guide

Active Noise Cancelling Off:
Hold the ANC button for 1 second. Green LED light will turn off. The ANC function must be switched off
by manual operation.
Bluetooth Switch On:
To switch on, press and hold the MFB about 3 seconds, blue light on, there is a tone “Power on, pairing”,
The headset enters Bluetooth searching mode.
Bluetooth Switch Off:
To switch off, press and hold the MFB about 3 seconds, there is a tone “Power off”.
Pairing:
1. Ensure that your phone or Bluetooth device is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset
enters the pairing mode, and the blue indicator light starts to flash quickly. To pair the headset if it has been
previously paired with another device, ensure that the previously paired devise is switched off.
3. Activate the Bluetooth feature on your phone or Bluetooth devices, and set it to search for Bluetooth
devices.
4. Select “SNAP-ON NC HEADPHONES” from the list of found devices on your phone or Bluetooth
devices.
5. When successfully connected, there is a tone “Bluetooth Connected”, the blue light turns to continuously
lighting.
The headset that has been previously paired with another device will automatically connect with the device
if the device is power on and within connecting range, if not, the headset will enter standby mode with
continuously blue light.
Adjust the volume:
Turn the volume up or down press the volume +/- key quickly during a call or while listening to music.
Calls:
Click the MFB to answer it, or press and hold about 1.5 seconds to reject the call. During a call, short press
MFB to end it.
Activate Voice Assist:
Quickly Press the MFB twice to activate voice assist.
Listen to Music:
To play a song, select in the music player and press the MFB on the headset.
To pause or resume playing a song, press the MFB.
To select the next song during playback, press and hold the + key.
To select the previous song, press and hold the volume - key.
To increase the volume, press the + key quickly.
To decrease the volume, press the - key. (Until Mute)
Disconnect the Headset:
To disconnect the headset from your device, switch off the headset, or disconnect it in Bluetooth menu of
your device.
Passive Mode:
It can be a wired headphone to save batteries. Simply connect one end of the 3.5mm-USB C audio cable to
the USB C port of the left ear cup to your MP3 player. Inserting an audio cable disable the wireless
functionality.