Use and Care Guide

OPERATION INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

• Align the battery with the cavity in the handle

housing on the blower (A).

• Grasp the trigger handle (H) rmly.

• Insert the battery in the opening until the battery

release button (I) locks into place. You should hear

a “click” once it is installed.

• Press and hold the battery release button (I) with

rm grip.

• Grasp the trigger handle rmly. Pull the battery

pack out of the handle.

Note: The battery ts into the handle snugly in order to prevent accidental dislodging. It may require a

strong pull to remove it.

a. To install the battery:

b. To remove the battery:

BATTERY

• Squeeze the trigger (J) to start the blower.

• To change speed, squeeze the trigger to increase

the speed and release the trigger slightly to

decrease the speed.

• Release the trigger completely to stop the blower.

1. STARTING/STOPPING THE BLOWER