Use and Care Guide

OPERATING INSTRUCTIONS

1. To Attach Battery Pack

a. Press the switch-lock button (A) marked

set it to the lock position.

b. Align the raised portion on the battery pack

(not included) with the grooves on the bottom

of the tool, then slide the battery pack onto the

saw as shown.

c. Make sure that the latches on the battery

pack snap into place and the battery pack is

secured to the tool before beginning operation.

NOTICE: When placing the battery pack on the

tool, be sure that the raised rib on battery pack

aligns with the groove on the tool and the latches

snap into place properly. Improper attachment of

the battery pack can cause damage to internal components.

To Detach Battery Pack

a. Press the switch-lock button (A) marked

to set it to the lock position.

b. Press the battery-release button to release the battery pack.

c. Pull backward on the battery pack to remove it from the tool.

2. Variable-speed Trigger Switch and

Switch-Lock Button

a. To turn the saw ON, press the switch-lock

button (A) marked

to unlock the switch,

then squeeze the variable-speed trigger

switch (B).

b. To turn the saw OFF, release the trigger

switch. The switch can be locked in OFF by

pressing the switch-lock button marked to

reduce the chance of unintentional starting.

c. To vary the speed, simply increase or

decrease the pressure on the variable-speed

trigger switch. The more tightly the variable

speed trigger switch is squeezed, the higher

the speed will be.

WARNING

• Battery tools are always in operating condition. Therefore, always press the switch-lock

button marked to lock the switch or remove the battery when the saw is not in use or when

carrying the saw at your side.

Attach

Battery release

button

Detach