Operating Guide

4
SYMBOLS DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
hrs Hours Time
n
o
No Load Speed Rational speed, at no load
/min Per Minute
Revolutions, strokes, surface speed, orbits, etc., per
minute.
Lithium-Ion Battery Recycling
Designates that this tool is in compliance with
Lithium-Ion battery recycling program requirements.
Safety Alert Symbol Precautions that involve your safety.
Read the Operator’s Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this product.
Eye and Head Protection
Wear eye and head protection when operating this
equipment.
Gloves
Wear non-slip, heavy-duty protective gloves when
handling the pole saw and the blade.
Safety Footwear
Wear non-slip safety footwear when using this
equipment.
Kickback DANGER! Beware of kickback.
Risk of Electrocution DANGER! Risk of electrocution!
Electric Shock
Failure to use in dry conditions and to observe
safe practices can result in electric shock.
Keep Bystanders Away Keep all bystanders at least 50 ft. (15 m) away.
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS
Wet conditions Alert Do not expose to rain.
Ear Protection Wear ear protection when operating this equipment.
Direct Current
Type or a characteristic of current.