Use and Care Guide

OPERATING INSTRUCTIONS

3. Variable-speed Trigger Switch

a. To turn the rotary hammer ON, press the

variable-speed trigger switch (E).

b. To turn it OFF, release the variable-speed

trigger switch.

c. The variable-speed trigger switch delivers

higher speed with increased trigger pressure

and lower speed with decreased trigger

pressure.

4. Mode Selector

WARNING

• ALWAYS place the direction-of-rotation selector

(D) in the center-lock position when not using

the tool, cleaning, or making adjustments.

Failure to do so could result in accidental

starting which can cause serious personal injury.

The mode selector (C) allows the tool to be set for

various applications. Rotate the selector until the

button snap-locks to change the operating mode.

Drilling mode : For drilling action in woods,

metals, plastics, or other materials and for

screwdriving.

Hammer drilling mode

: For drilling with hammer action in concrete, brick, or similar hard

material.

Chiseling mode

: For light chipping and chiseling applications.

Non-working mode

: For use only to rotate a at chisel to the desired position.

NOTICE: Never change the mode setting when the tool is running. Otherwise, the machine

can be damaged.