Use and Care Guide
2
TABLE OF CONTENTS
Product Specications ......................................................................................2
Packaging Contents ......................................................................................... 3
Safety Information ............................................................................................ 4
Preparation .......................................................................................................8
Operating Instructions ...................................................................................... 9
Care and Maintenance ...................................................................................15
Troubleshooting.............................................................................................. 15
Warranty ......................................................................................................... 15
PRODUCT SPECIFICATIONS
COMPONENT SPECIFICATION
Rated voltage 24V
No-load speed 0-1400/min
Rated impact 0-4500 IPM
Max. drilling dia. 7/8″ (concrete)
1-1/4″ (wood)
1/2″ (steel)
Tool holder SDS-plus
Operating temperature -4°F - 113°F (-20°C-45°C)
Charging temperature 41°F - 104°F (5°C-40°C)