Use and Care Guide

OPERATING INSTRUCTIONS

1. Battery Pack

To Attach Battery Pack

a. Press the switch-lock button (F) to the lock

position.

b. Align the raised portion on the battery pack with

the grooves on the bottom of the tool and slide

the battery pack onto the saw as shown.

c. Make sure that the latches on the battery pack

snap into place and the battery pack is secured

to the tool before beginning operation.

NOTICE: When placing the battery pack on the tool,

be sure that the raised rib on battery pack aligns with

the groove on the tool and the latches snap into place

properly. Improper assembly of the battery pack can

cause damage to internal components.

To Detach Battery Pack

a. Place the switch-lock button (F) to the lock

position.

b. Press the battery-release buttons to release the

battery pack.

c. Pull forward on the battery pack to remove it

from the tool.

2. Variable-speed Trigger Switch and

Switch-Lock Button

a. To turn the saw ON, press the switch-lock button

(F) marked

to unlock the switch, then squeeze

the variable-speed trigger switch (G).

b. To turn it OFF, release the variable-speed

trigger switch.

WARNING

• Battery tools are always in operating condition.

Therefore, always press the switch-lock button

marked to lock the switch when the saw is not

in use or when carrying the saw at your side.

Variable Speed

The variable-speed trigger switch (G) delivers higher speed with increased trigger pressure and

lower speed with decreased trigger pressure.