Operating Guide

ManualsBrandsKobalt ManualsCordless Electric Snow Blowers40-Volt Max 20-in Single-Stage Push Cordless Electric Snow Blower (1-Battery Included)

15

CARE AND MAINTENANCE

Screw

Screw

• Remove the 3 screws from under the machine

that secure the scraper to the machine.

• Remove and discard the old scraper. Install

the new scraper and fasten it securely with 5

screws previously removed.

3 Screws

1

IMPORTANT: Always remove the

battery from the tool before performing any

maintenance on it.

1. REPLACING THE SCRAPER

NOTE: The scraper is located at the bottom of the

impeller housing. Ensure that the battery is not

installed in the tool.

• Remove the screw from each side plate that

holds the scraper.