Operating Guide
10
WARNING
• Do not allow familiarity with this product to make you careless. Remember that a careless fraction
of a second is sufcient to inict serious injury.
• Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
ASSEMBLY INSTRUCTIONS
• Open the quick-release levers (B) on the two
sides of the middle handle (A).
• Unfold the middle handle until they come to a
stop.
• Close the quick-release levers.
• Tighten the knobs to hold the middle handle in
position.
1. UNFOLDING THE MIDDLE HANDLE
2
A
B
Knob Knob
1. INSTALLING THE CAM LOCK
Knob
Spacer
Cam lock
Bolt
1
• Remove the knob and spacer from the cam
lock.
• Insert the bolt through the lower handle
housing.
• Slide the spacer over the bolt.
• Screw on the knob.
Note: Do not tighten the knob until the cam
lock is in place.
• Fold the cam lock to lock the handle into place.