Operating Guide

• Place the snow shovel on the ground or on a

work bench. Position the snow shovel so that the

impeller is facing up.

• Remove the four screws (BB) that are located

beneath the impeller that secure the scraper (M)

to the housing using a Phillips screwdriver (not

included).

• Remove the scraper and discard it in the proper

manner.

• Snap the new scraper into position and attach it

to the snow shovel by reinstalling the four screws

(BB).

• Allow the motor to cool down before transporting.

• Secure the snow shovel while transporting.

• When moving the snow shovel, grasp it by the top

handle and auxiliary handle.

1. TRANSPORTING THE SNOW SHOVEL

CARE AND MAINTENANCE

2. SCRAPER REPLACEMENT

IMPORTANT: Always remove the

battery from the tool before performing any

maintenance on it.