Operating Guide

PREPARATION

a. Align the pin (E) on the upper handle

assembly (A) with the hole (F) on the lower

handle assembly (B). Insert the upper

handle assembly into the lower handle

assembly until the pin clicks into the hole.

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 5 minutes

ASSEMBLY INSTRUCTIONS

WARNING

To prevent accidental starting that could cause serious personal injury, always remove the battery

pack from the tool when assembling parts.

1. ASSEMBLING THE SHAFTS

b. Once the two shafts are secured, turn

the lock knob (G) clockwise until it is fully

tightened.