Operating Guide

12
• Place the snow shovel on the ground or on a
work bench. Position the snow shovel so that the
impeller is facing up.
• Remove the four screws (BB) that are located
beneath the impeller that secure the scraper (F)
to the housing using a Phillips screwdriver (not
included).
• Remove the scraper and discard it in the proper
manner.
• Snap the new scraper into position and attach it
to the snow shovel by reinstalling the four screws
(BB).
• Allow the motor to cool down before transporting.
• Secure the snow shovel while transporting.
• When moving the snow shovel, grasp it by the top
handle and auxiliary handle.
1. Transporting the snow shovel
1
CARE AND MAINTENANCE
2. Scraper replacement
F
BB
F
2
IMPORTANT: Always remove the
battery from the tool before performing any
maintenance on it.
BB