Operating Guide

• Align the pin on the upper handle assembly

(A) with the hole on the lower handle as-

sembly (B). Insert the upper handle assem-

bly into the lower handle assembly until the

pin clicks into the hole.

• Once the two shafts are secured, turn the

lock knob clockwise until it is fully tightened.

ASSEMBLY INSTRUCTIONS

WARNING

To prevent accidental starting that could cause serious personal injury, always remove the battery

pack from the tool when assembling parts.

1. Assembling the shafts

Hole

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to assem-

ble the product.

Estimated Assembly Time: 5 minutes

2. Adjusting the auxiliary handle position

• Position the front/auxiliary handle (E) onto the

upper portion of the shovel section by sliding

over the rubber sleeve (J).

• Once the front handle is in the desired position,

slide the bolt (CC) through the underside of the

handle and secure with the fastening knob (AA).

Tighten until there is no movement in the handle.

• The front handle can be adjusted to a suitable

position.

Lock knob