Operating Guide

kobalttools.com
5
SYMBOLS DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
Class II Construction Double-insulated construction
n
o
No Load Speed Rational speed, at no load
/min Per Minute
Revolutions, strokes, surface speed,
orbits, etc., per minute.
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
Read the Operator’s Manual
To reduce the risk of injury, user must
read and understand operator’s manual
before using this product.
Eye Protection
Wear eye protection with side shields
that are marked to comply with ANSI
Z87.1 when operating this equipment.
Safety Alert Precautions that involve your safety.
Long Hair
Failure to keep long hair away from the
air inlet could result in personal injury.
Loose Clothing
Failure to keep loose clothing from
being drawn into air intake could result
in personal injury.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.