Operating Guide

kobalttools.com

ASSEMBLY INSTRUCTIONS

To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach when

operating string trimmer. Keep proper balance at all times for better control of the tool in unexpected

situations.

2. Front handle

a. Position the front/auxiliary handle (E) onto the

upper portion of the trimmer section by sliding over

the rubber sleeve (J).

b. Once the front handle is in the desired position,

slide the bolt (CC) through the underside of the

handle and secure with the fastening knob (BB).

Tighten until there is no movement in the handle.

c. The front handle can be adjusted to a suitable

position.

WARNING

Hardware Used

Fastening knob

Bolt

x 1

3. Installing an attachment to the power head

a. Loosen the attachment knob (T) on the coupler.

b. Push in the release button (Q) located on the lower

tube (K). Align the button with the positioning hole

(R) on the power head coupler (F).

c. Slide the lower tube (K) in to the power head

coupler (F) until the release button (Q) engages in

the positioning hole (R).

d. Tighten the attachment knob securely.

Note: If the button does not release completely in

the positioning hole (R), the shafts are not locked in

place. Slightly rotate from side to side until the button

is locked into place.