Use and Care Guide

5
SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL DEFINITION SYMBOL DEFINITION
V Volts n
0
No-load Speed
A Amps RPM Revolutions per Minute
Hz Hertz
Direct Current
WARNING- To reduce the
risk of injury, user must read
instruction manual.
A danger, warning or caution. It
means ‘Attention! Your safety is
involved.’
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using electric trimmers, basic safety precautions should always be followed to reduce
the risk of re, electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
DANGER
Do not rely on the tool’s insulation against electric shock. To reduce the risk of electrocution,
never operate the tool in the vicinity of any wires or cables which may carry electric current.
CAUTION
Wear appropriate personal hearing protection during use. Under some conditions and
durations of use, noise from this product may contribute to hearing loss.
Avoid dangerous environments - Don’t use appliances in damp or wet location.
Don’t use in rain.
Keep children away - All visitors should be kept at least 100 ft. away from work area.
Dress properly - Do not wear loose clothing or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.
Use safety glasses - Always use face or dust mask if operation is dusty.
Use the right appliance - Do not use the tool for any job except that for which it is intended.
Don’t force the appliance - It will do the job better and with less likelihood of a risk of injury
at the rate for which it was designed.
Don’t overreach - Keep proper footing and balance at all times.
Stay alert - Watch what you are doing. Use common sense. Do not operate the appliance
when you are tired.
Keep guards in place and in working order.
Keep hands and feet away from the cutting area.
Store idle appliances indoors - When not in use, the appliances should be stored indoors
in a dry and high or locked-up place with the battery pack removed out of reach of children.