Use & Care Guide

TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
Safety Information ....................................................................................................................
Package Contents ....................................................................................................................
Preparation ..............................................................................................................................
Care and Maintenance ............................................................................................................
Troubleshooting .................................................................................................................................
Warranty .................................................................................................................................
3
4
5
Disassembly Instructions for the Automatic Filter....................................................................
6
Reinstallation Instructions for the Automatic Filter................................................................... 7
Operating Instructions.............................................................................................................. 8
8
9
9
RECOMMENDED SHADE NUMBERS
WELDING PROCESS
Covered Electrode
MIG Plate Welding
MIG Sheet Metal
TIG
MAG
Arc Gouging
Plasma Cutting
Plasma Welding
3.94 in. × 2.36 in.
5.25 in. × 4.5 in. × 0.37 in.
4
9 to 13 variable
Protection up to 15
Solar cell & replaceable battery
Fully automatic
Adjustable dial
-10°C to 65°C (14°F to 149°F)
-20°C to 85°C (- 4°F to 185°F)
Nylon 801
592g
1/20,000 of a second
0.1- 0.9 of a second adjustable
Viewing Area
Filter Dimension
Light Shade Number
Dark Shade Number
UV/IR
Power Supply
Power On/Off
Light to Dark
Dark to Light (Delay Time)
Sensitivity
Operation Temperature
Storage Temperature
Helmet Material
Total Weight
Available
Grinding Function
Low Battery Warning Flash
Grinding Flash
Yes
Yes
Arc Sensors 4
2
Description Specification