Use and Care Guide

3
SPECIFICATIONS
6 IN.
10,000 RPM +/- 10%
6.4 CFM
1/4 IN. NPT
3/8 IN.
90 PSI
COMPONENT
SANDING PAD
FREE SPEED
AVERAGE AIR CONSUMPTION
AIR INLET
AIR HOSE
WORKING PRESSURE
PRODUCT SPECIFICATIONS
SAFETY INFORMATION
WARNING
WARNING
Please read and understand this entire manual before attempting to assemble, operate
or maintain this product. If you have any questions, please call our customer service
department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m. EST, Monday – Friday.
Improper operation or maintenance of this tool could result in serious injury and property
damage. Read and understand all warnings and operation instructions before using this
tool. When using any tool, basic safety precautions should always be followed to reduce
the risk of personal injury. Use each tool for its intended function only. Do not use this
product in unsafe work conditions. It is always recommended to keep a fire extinguisher
and first aid kit near work areas.
FAILURE TO OBSERVE AND FOLLOW SAFETY INSTRUCTIONS COULD RESULT
IN INJURY OR DEATH.
Some dust created by paint spraying, power sanding, sawing, grinding, drilling and
other related activities is known to the State of California to cause cancer, birth
defects and other reproductive harm. A listing of chemicals can be obtained from
www.oehha.ca.gov under Proposition 65.
Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks, cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals, work in a well ventilated area and
wear appropriate/approved safety equipment such as respirators or dust masks which
are specially designed to filter microscopic particles.