Installation Guide

SPRAY GUN SET-UP

TO PREVENT SERIOUS INJURY FROM EXPLOSION:

Use only clean, dry, regulated, compressed air to power this tool. Do not use

oxygen, carbon dioxide, combustible gases, or any other bottled gas as a

power source for this tool.

Lubricators should not be used with spray guns. The use of inline

lubricators will contaminate the material and will ruin the paint finish.

WARNING:

Air Supply Set-up

1. Not all accessories shown are included, but are recommended for best

performance (See Figure 1).

2. It is recommended that an in-line air filter be incorporated into the air supply.

Recommended Air Line Set-Up

PART NO.

1a/1b

2a/2b

3a/3b

4a/4b

5a/5b

6a/6b

7a/7b

Small Gravity/Siphon Feed Spray Gun

Female Plug (not included)

Female Coupler (not included)

Air Hose (not included)

In-Line Filter (not included)

Air Compressor (not included)

Air Pressure Regulator (not included)

3a 2a 3a

Air Flow

2b 3b

r Flow

Description