Installation Guide

20
CARE AND MAINTENANCE
8. Using provided wrench (8 mm), unscrew
the Fluid Nozzle by turning counterclockwise
and place it in the secondary container to
soak (See Figure 8a,8b).
8a
6. Unscrew the Fluid Adjustment Knob (G1,G2)
by turning counterclockwise, using a damp
eht ffo epiw ti no noitulos gninaelc htiw htolc
fluid adjustment knob and set it aside
(See Figure 6a,6b).
7. Pull out needle spring and the paint needle.
Place it in the secondary container to soak
(See Figure 7a,7b).
6a
7a
7b
G1
Counterclockwise
6b
G2
Counterclockwise