Use and Care Guide

ASSEMBLY INSTRUCTIONS

PREPARATION

Before beginning the assembly of the product, make sure all parts are

present. Compare parts with package contents list and hardware contents

list. If any part is missing or damaged, do not attempt to assemble the

product.

Estimated Assembly Time: 1 – 3 minutes

Tools and Materials Required For Assembly:

• 9/16 in. or adjustable wrench

• Thread Sealant Tape

• Tool Oil

• Male Plug

• Sanding Disc

• Flathead Screwdriver

1. Remove the air inlet protective cap from

the air inlet (F) (See Figure 1).

NOTE Use threaded sealant tape

(not included) on the threading of the

male plug.

Tighten male plug (not included), turning

clockwise with a wrench (not included) for

air tight connection (See Figure 2).

DO NOT OVERTIGHTEN.