Installation Guide

TROUBLESHOOTING

If you have any questions regarding the product, please call our customer service

at 1-888-3KOBALT, 8:00 a.m. - 8:00 p.m., EST, Monday - Friday.

Tank will not

hold enough air.

Tank fills slowly.

Cannot get air

out of tank.

PROBLEM

POSSIBLE CAUSE

CORRECTIVE ACTION

Pressure gauge not

reading correctly.

Intake valve obstructed

or damaged.

1. Low tank pressure.

2. Hose shutoff valve

closed.

3. Air chuck damaged.

Check air pressure at fill stem with tire

pressure gauge. Replace gauge if

gauge reads differently.

Inspect opening for foreign material.

Clean or replace.

1. Tank pressure must exceed tire

pressure. Increase tank pressure.

2. Turn discharge control wheel

counterclockwise to fully open.

3. Replace hose/air tire chuck

assembly.

DO NOT chisel, scrape, sandblast, grind or sand any portion of the WARNING:

tank (A). If the tank appears rusted or damaged in any way, discontinue use

immediately.

Dispose of tank in accordance with federal and local regulations.

CARE AND MAINTENANCE

To discharge air for maintenance and storage, pull the

manual decompression valve ring (located on the front

of the pressure relief valve G) until gauge (F) reads 30

PSI (Fee Figure 15).

NOTE:

Follow the proper draining instructions. To help prevent

surface rust, use and store tank in dry, clean area out

of reach of children.

Clean exterior of tank with a mild detergent and dampened cloth. Dry completely

before storage.

Printed in China