Use and Care Guide

OPERATING INSTRUCTIONS

Check the pressure gauge (F) while filling the tank,

until it has reached the desired amount of air needed

for your particular application.

DO NOT FILL AIR TANK BEYOND 185 PSI.

After the tank has been properly filled, remove the

compressor filling valve from the intake valve (I)

and screw the intake valve cap on clockwise

See Figure 4).

B. 1/4 inch Male Plug

NOTE: There is a check valve that the 1/4" male plug

is screwed into. No air will be released when removing

the air line after you have filled up the air

DO NOT FILL AIR TANK BEYOND 185 PSI.

tank.

Connect the coupler end of air hose to the 1/4 in.

male plug (K) on the air tank (See Figure 5).

Clockwise

Properly Filling Air Tank with Air

Only fill from a source of clean, dry compressed air.

There are two ways to fill the air tank with air:

A. Intake Valve

Unscrew the intake valve (I) cap by turning

counterclockwise (See Figure 2).

Place the filling valve from the compressor onto the

intake valve (I) on the air tank (See Figure 3).

Counterclockwise