Use & Care Guide

OPERATING INSTRUCTIONS

1. Return power to unit from main.

2. Check oil level per the Lubrication Section of this

manual.

3. Open the bottom drain valve (F) (see Figure 1). Turn

outlet valve to open air flow.

START-UP / BREAK-IN PROCEDURE

WARNING

Risk of Personal Injury. Never disconnect

threaded joints with pressure in tank!

WARNING

Risk of Personal Injury. Do not attach air

tools to open end of the hose until start-up is

completed and the unit checks okay.

4. Move pressure switch to the AUTO position to run the

unit (see Figure 2).

5. Run the unit for thirty (30) minutes at zero (0) PSI

(under no load) to break in pump parts.

6. Move the pressure switch lever or knob to OFF

and turn tank drain valve to shut off air flow. The

compressor is now ready for use.

7. Change oil after first fifty (50) hours of operation.

Perform oil changes every three (3) months.

kobalttools.com