Use and Care Guide

12
INSTALLATION INSTRUCTIONS
12
3. Familiarize yourself with the pressure switch once cover is removed.
2. Remove the pressure switch cover by loosening the
screw (see Figure 3). Use a Phillips screwdriver (not
included). Pressure switch styles may vary.
WARNING
Risk of Shock. All wiring and
electrical connections must be
performed by a qualifi ed electrician
familiar with industrial motor
controls. Installations must be in
accordance with local and national
codes.
3
Screw
4
ASME Safety
Valve
Motor Power
Cord
Line
Terminal
Ground
Screw
Motor Cord Strain
Relief
Motor Terminal
Tank Pressure
Gauge