KOBE Range Hoods Premium Series IN28 SQP-XX Series Model No.
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects. 3. Have a certified contractor/electrician test the unit before installation. IF THERE ARE ANY PROBLEMS: 1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL PACKAGING MATERIAL. 2. Have your original invoice as proof of purchase and product serial number ready. 3.
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS – CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............ERROR! BOOKMARK NOT DEFINED. COMPONENTS OF PACKAGE ..........................ERROR! BOOKMARK NOT DEFINED. INSTALLATION ............................................................................................................... 5 OPERATING INSTRUCTIONS ....................................................................................... 9 MAINTENANCE .......................................................
IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated constructions. 2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities.
What to Do In the Event Of a Range Top Grease Fire • • • • SMOTHER FLAMES with a tight filling lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911. NEVER PICK UP A BURNING PAN – You May Get Burned. DO NOT USE WATER, including wet dishcloths or towels – a violent stem blast will result.
COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) MODEL NO.: IN2830SQP-XX (30”) Range Hood Box {A} KOBE Range Hood {B} Warranty Registration Card x 1 {C} Quick Reference Guide x 1 {D} Airflow Efficiency Panel x 1 {E} 6” Round Plastic Collar x 1 {F} Wire Cap x 3 {G} Screw Package {D} {E} {F} {G} M4 x 1/2" (4) {A} {B} • {C} FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE www.koberangehoods.com OR CONTACT KOBE RANGE HOODS AT (626) 775-8880.
(Must keep all material for returns or refunds) MODEL NO.: IN2836SQP-XX (36”) Range Hood Box {H} KOBE Range Hood {I} Warranty Registration Card x 1 {J} Quick Reference Guide x 1 {K} Airflow Efficiency Panel x 2 {L} 6” Round Plastic Collar x 1 {M} Wire Cap x 3 {N} Screw Package {D} {E} {F} {G} M4 x 1/2" (4) {A} {B} • {C} FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE www.koberangehoods.com OR CONTACT KOBE RANGE HOODS AT (626) 775-8880.
INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1.
Figure 1 Preparation Before Installation NOTE: • • • • • • TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. Decide the location of the venting pipe from the hood to the outside. Refer to Figure 1. A straight, short vent run will allow the hood to perform more efficiently. Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood. Temporarily wire the hood to test for proper operation before installing.
Figure 4 Wiring to Power Supply SAFETY WARNING RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY. 10. Temporarily wire the hood to test for proper operation before installing.
Figure 7 Hood Installation 19. Slide the hood into the opening where it will be installed. 20. Locate the screw holes (4) on each side of the insert. Adjust the level of the hood casing support according to the thickness of the base (1/2 thickness plywood recommended – Refer to Figure 3). 21. Secure the hood using screw holes that are located in front and back of unit (screws provided). Refer to Figure 7. 22. Make sure the hood casing support is secure before releasing.
OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed as needed.
MAINTENANCE For optimal appearance, clean the range hood surface and filters regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. ***Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth. 2. If hood looks smudged (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel.
SPECIFICATIONS MODEL / SIZE IN2830SQP-XX / 30” IN2836SQP-XX / 36” COLOR 18-gauge commercial grade stainless steel CONSUMPTION / AMPERE 300W / 2.5A VOLTAGE 120V 60Hz NUMBER OF BLOWER 1 FAN TYPE: CENTRIFUGAL Single Horizontal Squirrel Cage EXHAUST Top 6” Round CONTROL Mechanical Push Button LIGHTS LED Lights (3W) x 2 HOOD DIMENSION (W x D x H) IN2830SQP-XX IN2836SQP-XX OPTIONAL ACCESSORIES (W x D x H) 1) Liner (for 30” hood only) Model No.
MEASUREMENTS & DIAGRAMS ***All ( ) are in millimeter. ***All inch measurements are converted from millimeters. Inch measurements are estimated. MODEL NO.: IN2830SQP-XX (30”) Side View Bottom View Front View Stainless Steel Liner (Sold Separately) Model No.
***All ( ) are in millimeter. ***All inch measurements are converted from millimeters. Inch measurements are estimated. MODEL NO.
PARTS LIST MODEL NO.: IN2830SQP-XX (30”) IN2836SQP-XX (36”) NO. 1 2 3 4 5 6 7 8 9 DESCRIPTION 6” Round Plastic Exhaust Wiring Box Blower System Electronic Component Box LED Light Driver Capacitor x 1pcs Control Switch LED Lights (3W) x 2 Airflow Efficiency Panel MODEL / SIZE IN2830SQP-XX IN2836SQP-XX PART NO. L1-0505-0007 L1-0231-2730 L1-0302-0120-802RO L1-0524-0003 L1-0402-0303 L1-0401-0120-24 L1-0405-0301 L1-0403-0601 B101-2830-09 B101-2836-09 MODEL / SIZE INL36211A PART NO.
MODEL NO.
CIRCUIT DIAGRAM MODEL NO.
TROUBLE SHOOTING Issue After installation, both motors and lights are not working. Lights are working, but motor(s) is not. The range hood is vibrating. The motor is working, but the lights are not working The range hood is not venting out correctly. Possible Cause The power is not on. The wire connection is not secure. The control panel and processor board wiring are disconnected. The control panel or processor board is defective. The motor(s) is defective. The capacitor(s) is defective.
WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized dealer. Please keep a copy of your original invoice as proof of purchase. TWO-YEAR LIMITED LABOR WARRANTY ON KOBE PREMIUM SERIES: For two years from the date of your original invoice from a KOBE authorized dealer, we will repair any parts or components free of charge that failed due to manufacturing defects.
THIS WARRANTY WILL BE VOIDED BY: 1. Improper installation and failure to follow installation instructions. 2. Any repair, alteration, modification not authorized by KOBE. 3. Duct alteration, modification and connection. 4. Incorrect electric current, voltage or wiring. 5. Improper usage of the product such as commercial, outdoor or other use besides residential indoor usage. 6. Purchasing this product from an unauthorized KOBE dealer. 7. Damaging the product due to negligence, misuse, abuse, or accident.
WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : ______________________________ 2. Model No. : ______________________________ 3. Serial No. : ______________________________ For warranty service or spare parts purchase in US, contact: KOBE Service Center Email (best): customer.service@koberangehoods.
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood overseas is at your own risk and will void your warranty. Cette hotte KOBE est fabriquée pour usage aux États-Unis et au Canada seulement.
