KOBE Range Hoods Brillia Series CXX81 Series Model No.
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects. 3. Have a certified contractor/electrician test the unit before installation. IF THERE IS ANY PROBLEM: 1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL PACKAGING MATERIAL. 2. Have your original invoice as proof of purchase and product serial number ready. 3.
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS..................................................................................... 1 COMPONENTS OF PACKAGE .................................................................................................. 3 INSTALLATION .......................................................................................................................... 4 OPERATING INSTRUCTIONS ......................................................
IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated construction. 2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities.
What to Do In The Event Of a Range Top Grease Fire SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911. NEVER PICK UP A BURNING PAN – You May Get Burned. DO NOT USE WATER, including wet dishcloths or towels – a steam blast will result.
COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) Glass Canopy Box (Box 1 of 2) {A} Glass Canopy {E} {F} {A} Range Hood Box (Box 2 of 2) {B} {C} {D} {E} {F} {G} {H} {I} {J} {K} KOBE Range Hood 2-pc Duct Cover Duct Cover Mounting Bracket Warranty Registration Card Quick Reference Guide Black Aluminum Filter (1 pc) Aluminum Duct Pipe Flapper (2 pcs) 6” Round Plastic Exhaust (1 pc) Screw Package {G} {H} {I} {J} {B} Pre-attached to Vent Adapter {C} {K} {D} Inner duct cover 12 x
INSTALLATION PLEASE READ ENTIRE INSTRUCTION BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1 (all calculations are in inches.
6. It is recommended to use metal/aluminum duct/pipe with a uniform size (ex. 6” round pipe from range hood to the outside). 7. If an elbow is necessary, a minimum of 12” straight run is necessary before the elbow. Clearance 8. Clearance is the distance between the cooktop and the bottom of the range hood. The recommended minimum clearance for this model is 26” and the maximum clearance is 30”. 9. It is important to install the hood at the recommended clearance.
Electrical Wire 19. Connect the range hood to an outlet. 20. If hardwired is desired, cut off the plug and connect three wires (black, white, green) to the outlet wires and cap with wire connectors. Connect the wires according to color (ex: black to black). Finish 21. Remove any protective film from the hood. 22. Before using, make sure that any accessories such as filters are properly installed where applicable. 23. Test the range hood to see if it is working properly.
OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed as needed. Button Control Power Control Light Control Decrease Fan Speed Increase Fan Speed Power Control To turn the hood ON/OFF, press the power button once. Speed Control To adjust the speed level, press the decrease fan speed button to decrease the speed and the increase fan speed button to increase the speed.
Light Control Press the light button to turn LED lights ON and OFF. The LED lights have 4 brightness levels, ranging from 1 to 4 (1 being the lowest and 4 being the brightest). Press and hold down the light button to increase the brightness by 1 level every 3 seconds. The level you use will be the same the next time you turn on the lights. If you press and hold down the light button to increase the brightness level again, it will start at the lowest level and increase by 1 level every 3 seconds.
MAINTENANCE For optimal performance, clean the range hood surface and filters regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. **Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth. 2. If hood looks smudged (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel.
SPECIFICATIONS MODEL / SIZE CXX8130QF-GBK-1 (30”) CXX8136QF-GBK-1 (36”) CXX8130QF-MBK-1 (30”) CXX8136QF-MBK-1 (36”) COLOR CXX8130QF-GBK-1 (30”) – Gloss Black Finishing CXX8136QF-GBK-1 (36”) – Gloss Black Finishing CXX8130QF-MBK-1 (30”) – Matte Black Finishing CXX8136QF-MBK-1 (36”) – Matte Black Finishing CONSUMPTION / AMPERE 240W / 2.
MEASUREMENTS & DIAGRAMS ***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in ( ) are millimeters.
PARTS LIST Model No.: CXX8130QF-GBK-1 (30”) CXX8136QF-GBK-1 (36”) CXX8130QF-MBK-1 (30”) CXX8136QF-MBK-1 (36”) NO. 1 2 3 4 5 6 7 8 9 10 DESCRIPTION Duct Cover Mounting Bracket Black Duct Cover Processor Board Capacitor LED Lights x 2 Black Control Unit Blower System Black Aluminum Filter Exhaust Plate Glass Canopy MODEL CXX81-30G CXX81-36G 12 PART NO.
Model No.
CIRCUIT DIAGRAM Model No.
TROUBLE SHOOTING Issue After Installation, both motors and lights are not working. Lights are working, but motor(s) is not. The range hood is vibrating. The motor is working, but the lights are not working. The range hood is not venting out correctly. Cold air is coming into the home. Possible Cause The power is not on. The wire connection is not secure. The control unit is defective. The motor is defective. The capacitor(s) is defective. The control unit is defective. The blower system is not secure.
WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Please keep a copy of your original invoice as proof of purchase. ONE-YEAR LIMITED LABOR WARRANTY ON KOBE BRILLIA SERIES: For one year from the date of your original invoice from a KOBE authorized dealer, we will repair any parts or components free of charge that failed due to manufacturing defects.
THIS WARRANTY WILL BE VOIDED BY: 1. Improper installation and failure to follow installation instructions. 2. Any repair, alteration, modification not authorized by KOBE. 3. Duct alteration, modification and connection. 4. Incorrect electric current, voltage or wiring. 5. Improper usage of the product such as commercial, outdoor or other usage other than residential indoor usage. 6. Purchasing this product from an unauthorized KOBE dealer. 7.
WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : __________________________ 2. Model No. : __________________________ 3. Serial No. : __________________________ For warranty service or spare parts purchase in US, contact: KOBE Service Center Email (best): customer.service@koberangehoods.
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood overseas is at your own risk and will void your warranty. Cette hotte KOBE est fabriquée pour usage aux États-Unis et au Canada seulement.