manual

8
Light Control
Press the light button to turn LED lights ON and OFF.
The LED lights have 4 brightness levels, ranging from 1 to 4 (1 being the lowest and 4 being the
brightest). Press and hold down the light button to increase the brightness by 1 level every 3
seconds. The level you use will be the same the next time you turn on the lights.
If you press and hold down the light button to increase the brightness level again, it will start at
the lowest level and increase by 1 level every 3 seconds.
Lights are controlled independently from power control and delay shutoff. Turning the power off
will not turn the lights off.
Baffle Filter Indicator
After hood usage has reached 30 hours, LED Display will show “C” to indicate that the baffle filters
need to be cleaned. The “C” will keep flashing until it is turned off. To turn it off, please clean the
baffle filters first and then turn off the indicator by pressing and holding the increase fan speed
button for 3 seconds. The “C” will disappear and a new cycle will start.
The cycle is preset for 30 hours. If the baffle filters are cleaned before the end of the 30 hour
cycle, press and hold the increase fan speed button for 3 seconds and the timer will reset.