KOBE Range Hoods Brillia Series ISX21 SQB-2 Series Model No.
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of package(s). 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects. 3. Have a certified contractor/electrician test the unit before installation. IF THERE IS ANY PROBLEM: 1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL PACKAGING MATERIAL. 2. Have your original invoice as proof of purchase and product serial number ready. 3.
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................................................................................... 1 COMPONENTS OF PACKAGE.................................................................................................. 3 INSTALLATION .......................................................................................................................... 4 OPERATING INSTRUCTIONS........................................................
IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated construction. 2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities.
What to Do In The Event Of a Range Top Grease Fire • • • • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911. NEVER PICK UP A BURNING PAN – You May Get Burned. DO NOT USE WATER, including wet dishcloths or towels – a steam blast will result.
CONTENTS OF PACKAGE (Must keep all material for returns or refunds) ISX21 SQB-2 Series Range Hood Box {A} {B} {C} {D} {E} {F} {G} {H} {I} {J} Range Hood Body (w/ motor) – 1 2-pc Duct Cover – 1 Telescopic Stack – 1 Warranty Registration Card – 1 Quick Reference Guide – 1 Baffle Filters x 2 (30” hood) x 3 (36” & 42” hood) 6” Round Vent Adapter (for vertical venting) Aluminum Duct Pipe Flapper/Damper (2 pcs) Screw Package {H} Pre-attached to Vent Adapter {J} {A} {B} Inner duct cover Upper stack Outer
INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1 (all calculations are in inches.
6. It is recommended to use metal/aluminum duct/pipe with a uniform size (ex. 6” round pipe from range hood to the outside). 7. If an elbow is necessary, a minimum of 12” straight run is necessary before the elbow. Clearance 8. Clearance is the distance between the cooktop and the bottom of the range hood. The recommended minimum clearance for this model is 30” and the maximum clearance is 36”. 9. It is important to install the hood at the recommended clearance.
Electrical Wire 22. Connect the range hood to an outlet. 23. If hardwired is desired, cut off the plug and connect three wires (black, white, green) to the outlet wires and cap with wire connectors. Connect the wires according to color (ex: black to black). Finish 24. Remove any protective film off the hood, if any. 25. Before using, make sure that any accessories such as filters are properly installed where applicable. 26. Test the range hood to see if it is working properly.
OPERATING INSTRUCTIONS 3-Speed Mechanical Control Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed as necessary. Button Control OFF = Turns the range hood OFF. Q = Lowest fan speed (QuietMode). L = Middle fan speed (Low). H = Highest fan speed (High). = Turns the lights ON/OFF. Power Control To turn the hood off, press the OFF button once while it is ON.
MAINTENANCE For optimal performance, clean the range hood surface and baffles regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. *** Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth. 2. If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel.
SPECIFICATIONS MODEL / SIZE ISX2130SQB-2 / ISX2130SQB-DC37-2 (30”) ISX2136SQB-2 / ISX2136SQB-DC37-2 (36”) ISX2142SQB-2 / ISX2142SQB-DC37-2 (42”) MATERIAL 20-Gauge Commercial Grade Stainless Steel CONSUMPTION / AMPERE 120W / 2.
MEASUREMENTS & DIAGRAMS ***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in ( ) are millimeters. MODEL NO.
MODEL NO.: ISX2130SQB-DC37-2 / ISX2136SQB-DC37-2 / ISX2142SQB-DC37-2 Extension Duct Cover ISX21DC37-O * For the diagram of hood dimension, please refer to Page 10.
PARTS LIST MODEL NO.: NO. ISX2130SQB-2 / ISX2130SQB-DC37-2 (30”) ISX2136SQB-2 / ISX2136SQB-DC37-2 (36”) ISX2142SQB-2 / ISX2142SQB-DC37-2 (42”) DESCRIPTION 1 LED Driver x 2 2 3 4 5 6 7 Duct Cover 6” Exhaust Vent Capacitor (12uF, 250 VAC) LED Light (3W) Control Unit Baffle Filter 8 Blower System MODEL / SIZE PART NO.
MODEL NO.
CIRCUIT DIAGRAM MODEL NO.
TROUBLE SHOOTING Issue After Installation, both motors and lights are not working. Lights are working, but motor(s) is not. Possible Cause The power is not on. The range hood is vibrating. The blower system is not secure. Tighten the turbine impeller/squirrel cage and air chamber. The squirrel cage is not balanced. Hood is not secured in place. Replace the squirrel cage. The motor is working, but the lights are not working. Solution Make sure the circuit breaker and the unit’s power is ON.
WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Please keep a copy of your original invoice as proof of purchase. ONE-YEAR LIMITED LABOR WARRANTY ON KOBE BRILLIA SERIES: For one year from the date of your original invoice from a KOBE authorized dealer, we will repair any parts or components free of charge that failed due to manufacturing defects.
5. Improper usage of the product such as commercially, outdoor or other usage other than its intended purpose which is residential indoor usage only. 6. Product is purchased from an unauthorized KOBE dealer. 7. Product is damaged due to negligence, misuse, abuse, accident.
WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : 2. Model No. : 3. Serial No. : For warranty service or spare parts purchase in US, contact: KOBE Service Center Email (best): customer.service@koberangehoods.com Phone: 1-626-775-8880 ext. 103 Toll Free: 1-877-BUY-KOBE (289-5623) For warranty service or spare parts purchase in Canada, contact: Email (best): customer.service@koberangehoods.
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood overseas is at your own risk and will void your warranty. Cette hotte KOBE est fabriquée pour usage aux États-Unis et au Canada seulement.