KOBE Range Hoods RA92 Series Model No. RA9230SQB-1 (30”) RA9236SQB-1 (36”) RA9230SQB-DC30-1 (30”) RA9236SQB-DC30-1 (36”) RA9230SQB-DC46-1 (30”) RA9236SQB-DC46-1 (36”) RA94 Series Model No.
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects. 3. Have a certified contractor/electrician test the unit before installation. IF THERE IS ANY PROBLEM: 1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL PACKAGING MATERIAL. 2. Have your original invoice as proof of purchase and product serial number ready. 3.
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................................................................................... 1 COMPONENTS OF PACKAGE.................................................................................................. 3 INSTALLATION .......................................................................................................................... 5 OPERATING INSTRUCTIONS........................................................
IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated construction. 2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities.
What to Do In The Event Of a Range Top Grease Fire • • • • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911. NEVER PICK UP A BURNING PAN – You May Get Burned. DO NOT USE WATER, including wet dishcloths or towels – a steam blast will result.
COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) RA92 Series Range Hood Box {H} {A} {B} {C} {D} KOBE Range Hood (with RA092DC-1) Warranty Registration Card Quick Reference Guide Baffle Filter x 2 (30” hood) x 3 (36” hood) {E} Hood Mounting Bracket {F} 6” Round Plastic Collar {G} Duct Cover Mounting Bracket {H} Screws Package {I} Wire Cap x 3 {J} Screws Package {I} 3/16” x 3/8” (6 PCS) Wire caps (3) {J} M4 x 1-1/2” (5) Extension Duct Cover RA0930DC {A} (Included in RA92 SQB-DC30-
(Must keep all material for returns or refunds) RA94 Series Range Hood Box {H} {A} {B} {C} {D} KOBE Range Hood (with RA092DC-1) Warranty Registration Card Quick Reference Guide Baffle Filter x 2 (30” hood) x 3 (36” hood) {E} Hood Mounting Bracket {F} 6” Round Plastic Collar {G} Duct Cover Mounting Bracket {H} Screws Package {I} Wire Cap x 3 {J} Screws Package {I} 3/16” x 3/8” (6 PCS) Wire caps (3) {J} M4 x 1-1/2” (5) Extension Duct Cover RA0930DC {A} (Included in RA94 SQB-DC30-1 ONLY) {K} Duct Cove
INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1. (All calculation in inches.
Figure 1 Preparation before Installation NOTE: - - TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. Decide the location of the venting pipe from the hood to the outside. Refer to Figure 1. A straight, short venting run will allow the hood to perform more efficiently. Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood. Temporarily wire the hood to test for proper operation before installing.
Figure 4 Wiring to Power Supply THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY. - If hood is operating normally, connect three wires (black, white and green) to house wires and cap with wire connectors. - Store wires in the wiring box.
OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed as needed. Power Control Press Power Control to turn On/Off the range hood. Speed Control The fan will start on Speed #3. Press increase the speed level. button to decrease the speed level.Press button to To activate 3-minute delay shutoff, press and hold button.
ECO Mode can be activated while fan is running or off. Press and hold button until icon briefly appears in the LED Display. While fan is running you can change the speed, use delay shutoff or turn off fan without disabling ECO Mode. When fan is off and ECO Mode has been activated, the icon will appear in the LED Display. The is operating on QuietMode™. To deactivate, press and hold appears in the LED Display.
MAINTENANCE For optimal performance, clean the range hood surface and baffles regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. *** Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth. 2. If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel.
SPECIFICATIONS MODEL / SIZE For 30” model RA9230SQB-1 RA9230SQB-DC30-1 RA9230SQB-DC46-1 For 36” model RA9236SQB-1 RA9236SQB-DC30-1 RA9236SQB-DC46-1 RA9430SQB-1 RA9430SQB-DC30-1 RA9430SQB-DC46-1 RA9436SQB-1 RA9436SQB-DC30-1 RA9436SQB-DC46-1 COLOR 18-Gauge Commercial Grade Stainless Steel CONSUMPTION / AMPERE 300W / 2.
HOOD WEIGHT (lbs) SPEED Air Capacity (cfm) Sone* (dB) RA9230SQB-1 (30”) RA9236SQB-1 (36”) Net 34.4 37.5 Gross 42.0 48.5 RA9430SQB-1 (30”) RA9436SQB-1 (36”) 34.4 37.5 42.0 48.5 QuietMode™ 300 1.0 (40) 1 420 2.0 (50) *One sone is equivalent to the sound of a refrigerator at 40 decibels. **Specifications subject to change without notice. 12 2 510 3.5 (58) 3 590 5.0 (63) 4 640 5.4 (64) 5 750 6.
MEASUREMENTS & DIAGRAMS *** All inch measurements are converted from millimeters. Inch measurements are estimated. *** All measurements in ( ) are millimeters. MODEL NO.
***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in ( ) are millimeters. MODEL NO.
MODEL NO.: RA9230SQB-DC30-1 (30”) / RA9236SQB-DC30-1 (36”) RA9430SQB-DC30-1 (30”) / RA9436SQB-DC30-1 (36”) Extension Duct Cover Model: RA0930DC * For the diagram of hood dimension, please refer to Page 13-14. MODEL NO.: RA9230SQB-DC46-1 (30”) / RA9236SQB-DC46-1 (36”) RA9430SQB-DC46-1 (30”) / RA9436SQB-DC46-1 (36”) Extension Duct Cover Model: RA0946DC * For the diagram of hood dimension, please refer to Page 13-14.
PARTS LIST MODEL NO.: NO. 1 2 3 4 5 6 7 8 9 10 11 RA9230SQB-1 / RA9230SQB-DC30-1 / RA9230SQB-DC46-1 (30”) RA9236SQB-1 / RA9236SQB-DC30-1 / RA9236SQB-DC46-1 (36”) DESCRIPTION Duct Cover-Mounting Bracket Duct Cover 6” Round Plastic Exhaust LED Light (3W) Control Panel Control Panel Support Blower System Capacitor Support Processor Board Capacitor x 1PCS Baffle Filter MODEL /SIZE RA092DC-1 PART NO.
MODEL NO.: NO. 1 2 3 4 5 6 7 8 9 10 11 RA9430SQB-1 / RA9430SQB-DC30-1 / RA9430SQB-DC46-1 (30”) RA9436SQB-1 / RA9436SQB-DC30-1 / RA9436SQB-DC46-1 (36”) DESCRIPTION Duct Cover-Mounting Bracket Duct Cover 6” Round Plastic Exhaust LED Light (3W) Control Panel Control Panel Support Blower System Capacitor Support Processor Board Capacitor x 1PCS Baffle Filter MODEL /SIZE RA092DC-1 PART NO.
CIRCUIT DIAGRAM MODEL NO.
TROUBLE SHOOTING Issue After Installation, both motors and lights are not working. Lights are working, but motor(s) is not. Possible Cause The power is not on. The wire connection is not secure. The control panel and processor board wiring are disconnected. The control panel and processor board is defective. The motor(s) is defective. The capacitor(s) is defective. The control panel or processor board is defective. The range hood is vibrating. The blower system is not secure.
WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Please keep a copy of your original invoice as proof of purchase. TWO-YEAR LIMITED LABOR WARRANTY ON KOBE PREMIUM SERIES: For two years from the date of your original invoice from a KOBE authorized dealer, we will repair any parts or components free of charge that failed due to manufacturing defects.
6. Product is purchased from an unauthorized KOBE dealer. 7. Product is damaged due to negligence, misuse, abuse, accident. If we determine that the warranty exclusions listed above applies or if you fail to provide all necessary documentation for warranty service, you will be responsible for all expenses associated with the requested service, including parts, labor, shipping, travelling, and any other expense related to the service request.
WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : 2. Model No. : 3. Serial No. : For warranty service or spare parts purchase contact: KOBE Service Center (USA ONLY) Toll Free: 1-877-BUY-KOBE (289-5623) Email: customer.service@koberangehoods.com For service in Canada and to report a problem, please contact: Tel: 1-626-775-8880 Email: customer.service@koberangehoods.
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood overseas is at your own risk and will void your warranty. Cette hotte KOBE est fabriquée pour usage aux États-Unis et au Canada seulement.
