User's Manual

ManualsBrandsKobian Canada ManualsAudio EquipmentBluetooth Headset

Model No.: HS-BT102

Thank you for purchasing a Hip Street product and we hope you enjoy using it. Please visit our

website at www.hipstreetonline.in

Preface

Kindly read and retain all the operating instructions before operating the unit. We cannot

assume any liability that may arise out of improper operation or incidental/accidental damages.

The contents of this user manual are subject to change based on newer developments.

Introduction

The Hip Street Bluetooth headset allows you the freedom to make and receive calls while on

the move or in the office. You can connect the headset to a compatible phone that supports

Bluetooth wireless technology.

Bluetooth wireless technology

Bluetooth wireless technology makes it possible to connect compatible communication

devices without using cables. A Bluetooth connection does not require that the phone and the

headset be in line of sight, but both devices should be within 10 meters of each other.

Overview

The figure below shows the main parts of the headset:

1. Answer/End (Talk) key

2. Indicator light (Power/Pairing Mode)

3. Volume keys

4. Microphone

5. Earphone

Summary of content (5 pages)

PAGE 1
Model No.: HS-BT102 Thank you for purchasing a Hip Street product and we hope you enjoy using it. Please visit our website at www.hipstreetonline.in. Preface Kindly read and retain all the operating instructions before operating the unit. We cannot assume any liability that may arise out of improper operation or incidental/accidental damages. The contents of this user manual are subject to change based on newer developments.
PAGE 2
6. Charging connector Before you can start using the headset, you must fully charge the battery. Charging the battery This device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device and void the warranty. 1. Connect the charging cable to the headset. 2. Connect the other end of the charging cable to an available USB port on your computer or laptop. (The computer or laptop must be powered on to change the headset.
PAGE 3
Troubleshooting If you cannot connect the headset to your phone, do as follows: 1. Ensure the headset is charged then go through the steps listed to pair your headset. 2. Ensure that the Bluetooth feature is activated on your phone. 3. Check to ensure the headset is within 10 meters of your mobile phone or Bluetooth device and that there are no obstructions that may prevent connectivity. Call Handling 1. To make a call, use your mobile phone in the normal way when the headset is connected to your phone.
PAGE 4
electronic devices, damage batteries, and warp or melt certain plastics. 4. Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. 5. Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. 6. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. 7. Do not paint the device.
PAGE 5
connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.