HS-IPDMKBCS User Manual April 2013
BT Keyboard Case Please read this user manual carefully before use. CONGRATULATIONS! Thank you for your purchase of this Hip Street product and we hope you enjoy using it. Please visit our website at www.hipstreet.com. Please ensure that you fully read and understand the information within this user manual prior to using your product. It is advised that you keep this user manual in a safe place for future reference. We sincerely hope that this high quality product offers you endless hours of entertainment.
BT Keyboard Case FCC WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to part 15 of the FCC Rules.
BT Keyboard Case Operational instructions of the iPad Mini Keyboard Case: Step I: Start Up - Place your iPad Mini into the groove as shown below. Step II: Key Functions ‐ Turn the Hipstreet keyboard ON by using the power switch on the face of the keyboard. ‐ Then press the Bluetooth button to put the Keyboard into “Pairing Mode”.
BT Keyboard Case 1. Bluetooth Button 2. Power Switch (ON/OFF) A: Bluetooth light When the Bluetooth button is activated and during pairing between the keyboard and your iPad Mini, this light will blink until the keyboard and iPad Mini is successfully paired. Once paired, this light will turn off.
BT Keyboard Case *Please charge the keyboard with the USB cable included. Step III: Pairing - Slide the Power Switch to power on the keyboard. - Press the Bluetooth button to put the keyboard in pairing mode. - On your iPad Mini tap “Settings”--“Bluetooth”. - Slide the Bluetooth switch to the “ON” position and your iPad Mini will start to search for Bluetooth devices. When it finds the “Hipstreet keyboard”, select it to begin pairing.
BT Keyboard Case Please Note: Step III is only needed for the initial setup. After your first successful connection, the keyboard will connect automatically to your iPad Mini whenever it is powered ON and the iPad Mini’s Bluetooth is ON. You may need to tap on the keyboard’s keys to wake it up from its power-saving mode.
BT Keyboard Case Troubleshooting: If you are unable to connect the keyboard to your iPad Mini, please try the following: z Check if the battery is low. When the battery is low, some keys will react slowly or won’t work. You should charge the keyboard. z Check that the power switch is in the “ON” position. z Re-pair the keyboard with your iPad Mini. See Step III. z Ensure the PIN code entered is correct and entered within 20 seconds of being displayed.
