Catalogue 1 Introduction .................................................................................................................................... 1 1.1 Acknowledgement ............................................................................................................... 1 1.2 Announcements ................................................................................................................... 1 2 Icon ...........................................................................
6 Communication Function ............................................................................................................. 49 6.1 Phone................................................................................................................................. 49 6.2 Text Message..................................................................................................................... 49 6.3 Contact List ..............................................................................
1 Introduction 1.1 Acknowledgement Thanks for your purchase of our product. M6200 is high definition tablet PC. It is based on Android 4.2.2 operation system, and easy to expand the third application procedure. The product is designed with various functions, including WCDMA, WIFI, BT, GPS, FM, voice call and so on.
with a different resolution or hardware configuration than yours and therefore can be slightly different from the final product. —The manufacturer takes no responsibility for loss of information or data caused by hardware or software failure. The user is responsible for performing timely backups of important data. —All information and images used in this user manual are provided ‘as is’ and are subject to change without notice.
2 Icon 2.1 Status and Reminder Reminder icons When some remind message appears in your reminder window, please click column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information. Then you can close the reminder window through clicking the column to slide up. Please refer to below status icons: New Email Airplane Mode USB connected USB debugging connected Return button Download Current electric Home button volume.
3 Quick Start Guide 3.1 Keys Function Keys Function Description: Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +(up) Increase the volume Volume -(down) Decrease the volume Click it in any interface will return to main interface. HOME button (home) Back button(back) Menu button Setting button Click it in any interface will return to previous menu This button will display in menu interface. Display recently browsed history 3.
Open the screen when it is closed. If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture as below picture, left slide to unlock and enter into camera, right slide the unlock icon to unlock the screen. Picture 3.1 3.4 Usage of Touch Screen M6200 operating methods There are below methods to view the main screen, menu and application procedure in your M6200.
Rotate For most pictures, you only need to retate the M6200 sidewise to change the screen direction from horizoncial to vertical. For instance, when you are typing words, and watching movies. 3.5 Home Page Main interface as below picture 3.2, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut. Notice column Batty volume time Picture3.
Picture 3.3 The shortcut icons management is in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon (can also overlay several icons) as Picture 3.4. 2. Then click the overlaid icons, the applications can be folded, as Picture 3.5. Click the unnamed folder in the black box, it will pop up the hidden keyboard, the folder name can be renamed (this is similar with Apple IOS system), the icons position can be changed through long press. Picture 3.
Picture 3.5 Remove the icons in desktop 1. Long press the icons need to be removed, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, and then move your finger to delete the icon. Change the wallpaper of desktop 1. In home page, long press any blank space in main screen, it will pop up a window to change the wallpaper. 2. Click the gallery or wallpaper gallery to select the wallpaper.
3.6 Visit Application Procedures Click in right top of Picture 3.2, enter into main interface as Picture 3.6, and choose the application procedure you want to visit. Picture 3.6 3.7 USB Connection M6200 storage configuration Before transmitting documents, you have to conduct storage configuration for your M6200: 1. Connect the M6200 and computer by USB cable, the reminder column will show the remind information. 2.
Picture 3.7 Copy the document into memory card 1. Connect M6200 to computer with USB cable. 2. As M6200 storage configuration, it is connected with computer successfully. 3. Open the “My computer” in your computer, check the items in “removable disc”. 4. Copy the documents you need into “removable disc”. 5. After copying finishes, click “shutdown the USB storage configuration” to uninstall.
2. Click Language and Keyboard. 3. In the text setting area will reveal all the installed words-typing methods in your M6200. 4. Tick the typing method you want. Use and switch of input method ① ⑤ ② ④ Picture 3.8 ③ 3 1 switch the capital and small letter 2 switch the mode of number input 3 click to insert the space 4 click input to execute 5 Delete the character in the left of cursor, click and hold to delete all the characters in the left of the cursor.
3.9 Operation Technique Enter widgets interface In the application interface, click widgets on the above of screen, or slide the screen, it will switch into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
4 Basic Setting 4.1 SIM Management 4.1-1 Voice call Click settings in main menu; choose SIM Management, as Picture 4.1 Picture 4.1 Click voice call, choose defaulted SIM card, as Picture 4.2 Picture 4.2 4.1-2 Video Call Click settings in main menu, choose SIM Management, and click video call, choose defaulted SIM card when makes video call, as Picture 4.
Picture 4.3 4.1-3 Message Click settings in main menu, choose SIM Management, click message, and choose the defaulted SIM card when sends message, as Picture 4.4 Picture 4.4 4.1-4 Data Connection Click setting application in main menu, choose SIM management, click data connection, and choose the defaulted SIM card, as Picture 4.5 Picture 4.
4.2 Wireless and Internet 1. Connect Wi-Fi 1) In the main menu or interface, choose setting application procedure. 2) Click WLAN, open Wi-Fi, M6200 will automatically search the available Wi-Fi wireless internet. As Picture 4.6 3) Choose the Wi-Fi internet you want to connect, if it has password, it will pop up the password window, enter password, click connect. Picture 4.6 2. Add Network 1) Click icon in right top, as Picture 4.7 Picture 4.
2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.8 Picture 4.8 3. Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.6 4. Keep WI-FI on during sleep. a) Click icon in right top of Picture 4.8, select advanced. b) Click Keep WI-FI on during sleep, as Picture 4.9 Picture 4.
4.3 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click Bluetooth and open it. 3. If somebody opens Bluetooth in your surroundings, click search device in right above, then M6200 will automatically search the Bluetooth device nearby. As picture 4.10 Picture 4.10 4. Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect. 5.
Picture 4.11 2. Check visibility timeout Select visibility timeout setting in Picture 4.11, choose the time you want to set, as Picture 4.12(Note: check overtime setting is the time setting when Bluetooth is checked) Picture 4.12 3. Display the file you received Choose display the file you received in Picture 4.11, you can view download and upload files. 4.4 Data Usage Check SIM card data usage, as Picture 4.
Picture 4.13 Check WIFI data usage Click icon in right top of Picture 4.13, click Data Usage, as Picture 4.14 Picture 4.14 4.5 More 4.5-1 Airplane Mode Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.5-2 VPN Open VPN, click add VPN network, as Picture 4.15. Input name and server address, then save.
Picture 4.15 Click VPN, as Picture 4.16, input VPN user name and password, click connect. Picture 4.16 4.5-3 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2.
Picture 4.17 Picture 4.18 3. Click keep WI-FI hotspots on, choose open time. 4. Return to previous menu, open portable WLAN hotspots, click configure WI-FI hotspots.
Picture 4.19 4. Set passwords you want to, password should be more than 8 numbers. 4.5-4 Mobile Networks 1. 3G service Click 3G service, as Picture 4.20, choose available defaulted SIM card, GSM is 2G network, and WCDMA is 3G network. Picture 4.20 a) Access Point Name( APN) Click mobile network, as Picture 4.
Picture 4.21 Choose access points name (APN), choose SIM card you need to connect, Choose connect type, as Picture 4.22 Picture 4.22 Remark: (CMWAP transmitters data through GPRS, the webpage it visit belongs to wap webpage, and CMNET support www browse mobile phone network, it can also log in webpage in computer. And the charges are also different.) b) Network Operator Click network operator, choose SIM card you need to connect, system will search available GSM and WCDMA network, as Picture 4.
Picture 4.23 4.5-5 GPRS data prior mode After Open GPRS data prior mode, systems will priority chooses your network. 4.6 Contextual Model 1. Open settings, click contextual model, as Picture 4.24, Picture 4.24 2. Click standard to enter into Picture 4.
Picture 4.25 1. Vibrate In picture 4.25, click vibrate, M6200 will vibrate when someone calls you. 2. Volume In picture 4.25, click volume, you can set ringtone, notice, and alarm volume, as Picture 4.26 Picture 4.26 3. Voice call Ringtone In picture 4.25, click voice call ringtone to choose voice call ringtone, as Picture 4.
Picture 4.27 4. Video call ringtone In Picture 4.25, click video call ringtone to choose video call ringtone, as Picture 4.28 Picture 4.28 (Note: Except standard, silent, meet, outdoor are only for selection, they can’t be set.) 4.7 Display 4.
1. Click Setting application procedure. 2. Click display, choose brightness. 3. Drag the portlito to adjust the brightness volume. As Picture 4.29 Picture 4.29 4. Click OK after brightness is adjusted 4.7-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—live wallpapers---gallery (user defined) ---wallpapers (system defect) ---video wallpaper, as Picture 4.
Picture 4.30 4.7-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate M6200 screen by G-sensor. 4.7-3 Sleep 1. Click setting application. 2. Click display. 3. Click sleep. 4. Set the sleep time as you want, as Picture 4.31 Picture 4.
4.7-5 Font size Click font size to adjust the font size, as Picture 4.32 Picture 4.32 4.8 Storage Open setting function, click memory, click preferred install location, you can choose install new application to choose preferred install location. Check SD card and M6200 storage space: 1. Enter into setting application. 2. Click storage, check storage space. Internal storage (1)System storage System storage is the space M6200 leave for system file, as Picture 4.33. it can’t be viewed.
Picture 4.33 (2)Internal storage Internal storage is M6200 local NAND storage, as Picture 4.34, if you need to check the storage content, you can check it in main menu. Picture 4.34 SD card You can check storage space, SD card available space, unmount SD card and erease SD card, as Picture 4.
Picture 4.35 Safely remove SD card 1. Click setting application. 2. Click memory. 3. Click uninstall SD card. 4. Now you can remove SD card safely. Note: Removing SD card safely can protect SD card and increase its lifetime. 4.9 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.
Picture 4.36 4.10 Application program 1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application and check system used storage space and left space. (As Picture 4.37) Picture 4.37 3. View internal storage used space and left space, as Picture 4.
Picture 4.38 4. View the working device, used space and available space, as Picture 4.39 Picture 4.39 4.11 Account and Sync 1. Select setting application 2. Click add an account, as Picture 4.
Picture 4.40 3. After successfully load, it will open the sync function, as Picture 4.41 Picture 4.41 4.12 Location service Click setting, select location service, as Picture 4.42 Picture 4.42 1. Google’s location service Open Google location service, you can use WIFI to positioning M6200.
2. GPS satellites Open GPS satellite, you can use GPS to positioning M6200. 3. GPS Assistance Open GPS Assistance, it can increase the speed of GPS positioning, but you need to insert SIM card and use data transmission. 4. EPO setting Click EPO setting, enter into Picture 4.43, then check if EPO positioning information and EPO has turned on auto download. Picture 4.43 5.
3. Click locked the screen. 4. Choose picture in text setting area. 5. Click next following the remind message. 6. The unlocked pattern board pop up, there are nine touch spots, connect 4 points from vertical, horizontal or diagonal direction. As Picture 4.44, move your finger from the screen when finish. The system will record your new unlock pattern. 7. Click continue. 8. When you see the reminder, enter the unlock pattern, then click confirm. Picture 4.44 Set unlock PIN code 1.
6. Enter the password again and the click confirm. Unknown source 1. In main interface, click setting. 2. Click safety. 3. Click unknown source, as Picture 4.45 Picture 4.45 Note: Manual installing APK files needs to turn on unknown source. 4.
Picture 4.46 Click setting, choose language and input, choose Android keyboard setting, click input language, as Picture 4.47 Picture 4.47 Choose the language you want to change in the language list, as Picture 4.
Picture 4.48 4.15 Backup and Reset Connect WIFI and login your google account, choose backup my data, system will back up your data into google server. If you need to recovery factory reset, please click reset, as Picture 4.49, if you need to formulate NAND, please click reset tablet. Picture 4.
4.16 Date and Time According to the preset, system will voluntarily apply the date, zone, and time provided by internet. Manual set date, time and zone 1. Click Setting application procedure. 2. Slide down the screen, then click date and time. 3. Turn off “auto setting of date and time”. 4. Turn off “auto setting zone’. 5. Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones. 6.
4.17 Fixed-time Startup and Shutdown 1. Click Setting application procedure 2. Click fixed-tine startup and shutdown. 3. Operate as below Picture 4.51 Turn on/off fixed-time startup Turn on/off fixed-time shutdown Picture 4.51 4.18 Assistance Function 4.18-1. Large size Click it to make system font large size 4.18-2. Click power button to end calls When Click call, press “power” button, call will end but not hold. 4.18-3. Touch and hold delay Click touch and hold delay to increase time, as Picture 4.
Picture 4.52 4.18-4 Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.19 Engineer Selection 4.19-1 USB adjustment After opening USB adjustment, you can use some software to read M6200 software, but when USB adjustment is turned on, USB storage needs to manual adjust. 4.19-2 Keep awaken state If you open keep awaken state, it wll never auto sleep when your M6200 is charging. 4.
Picture 4.53 4.20 About Tablet Check M6200 state 1. Check Setting application. 2. Click about tablet, check state message, model, Android version, version No and so on. 3. Click state message, check battery state, battery volume, SIM state, IMEI number, IP address. 5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music player, click the music you want to play, as Picture 5.
Picture 5.1 Random play Album Song name Pause/play Artist Album Picture 5.2 Previous song Next song Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.2 5.
you want to play. Operation of video player button as Picture 5.3 Adjust play progress Play/pause Choose the screen mode Picture 5.3 5.3 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2.
Slide Show 1. Open a picture, use virtual key to click menu key, display menu selection. 2. Click slide show, it will auto loop play(or choose folder) button in picture Crop 1. Click menu key to display menu selection. 2. Then click crop, click and drag related area to adjust the cropper. 3. Click cropper and drag it inside and outside to adjust the image. 4. After adjust the size you want, click crop. 5. If you wish to give up to crop, click cancel to return to picture browse. Edit 1.
Normal Camera mode Switch front/back camera Click it to take pictures camera shooting mode Full screen play mode. Sub menu Picture 5.4 5.5 FM Radio Click in the main interface or desktop to enter into FM radio interface: Radio button operation instruction as Picture 5.5: Enter into channel list Exit FM Current frequency Save button Previous channel Next channel Picture 5.5 Click search to search FM band, as Picture 5.
Picture 5.6 Save channels: Click button in the main interface to save the channel, and the channel will be saved in channels list. Note: You need to insert earphone as antenna when using FM radio, If no antenna, your M6200 can’t search any frequency band.
6 Communication Function 6.1 Phone 1 Click Phone application procedure Operate as Picture 6.1 Call history contact 录 The area of dial phone numbers Display phone numbers Picture 6.1 Hide keypad 6.2 Text Message 1. Enter into main menu, choose application procedure. 2.
Menu(discard,i nsert text and settings) Add receiver Directly input phone number or name Attach some files Send message Picture 6.2 6.3 Contact List Click Contact list Search contact: click Add contact: click in the main interface, enter into the contact list. button, enter into search function button, enter into add contact interface. 7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.
menu Address column Save bookmark Picture 7.1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.1.2 and you can click the menu you can refresh, save to bookmarks, share page, history and setting the webpage. Picture7.1.
7.2 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Yahoo, Gmail, Hotmail and 163),as Picture 7.2 Picture 7.2 a. Email Setting 1. After you click the sending email icon , you can see the email setting guide, which can help you to set. 2. Input your email address and password. 3. Click “Next step” button, choose your email type is POP3 or IMAP. 4.
1. Enter into your mail box. 2. Press Menu key. 3. Click Account 4. Press the account you want to delete. 5. Click Confirm to remove. c. Send E-mail 1. Click to display your mail box. 2. Click the inbox, it will refresh the new emails automatically; click it to read new email. 3. Press Menu key. Menus will popup. 4. 5. 6. 7. 8. 9. Click Edit to enter into new email editing interface. Input the receiver’s email address. Input the subject and email content.
8 Other Application Procedures 8.1 Clock Click Clock procedure; enter into below interface as Picture 8.1. There are clock, picture, music and homepage buttons. Set alarm Picture 8.1 8.2 Calculator 1. Click . 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calculator to calculate.
Picture 8.2 8.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon documents manager. to enter into RAM External SD card Picture 8.
icon to enter. b) Share file:choose any file, long press it, it will popup “share”, choose the share way you want in the list Picture 8.4 c) Install apk file:Choose the file suffixed .apk in the file manager; you can install the third part software as reminder. d) Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 8.
9 Installation of Procedures 9.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure is searched from internet to use on the system are all suffixed with .apk. 9.2 Uninstall Uninstall application procedure 1.
AppendixⅠFrequently Asked Questions Q: Why won't my device turn on? Make sure your tablet has been charged for at least four hours prior to use. When plugging in the cable, make sure you are not accidentally plugging it into the headphone jack. Also, the power button is on the side (for tablets) and not the one on the front of the touchscreen. The button on the front is for navigation.
abnormally poor performance, just let us know. Q: Why does my screen not respond properly when I use the touchscreen? This may be a couple of different things. If this only occurs when charging from a power supply, this may be due to noise from the power source not being adequately filtered out. You may wish to give the unit a full charge and then disconnect from power for use, or, if possible, charge with a USB cable instead. Otherwise, your screen calibration may be off.