Datasheet

ManualsBrandsKodak ManualsUSB flash drives1860949

EASTMAN KODAK COMPANY

343 State Street

Rochester, New York 14650 U.S.A.

A-61633 / Part #6J7090 December 2009

TM: Kodak

Scan Station 500

Maintenance Reference Guide

Cleaning the imaging area

Indicator Lights

The power button is illuminated blue when the

Scan Station is on and ready. Following is a

description of LED status:

LED Remedy

Steady blue Scan Station is on and ready to

scan.

Flashing blue Indicates the Scan Station is

initializing from powering on or

warming up and preparing to

scan.

Flashing or

steady red

Indicates a Scan Station error,

such as the Scan Station cover is

open.

Supplies and Accessories

CAT No. Description

148 4864 Kodak Feed Rollers

173 6115 Kodak Separation Module

826 9607 Kodak Feed Module

853 5981 Kodak Roller Cleaning Pads

169 0783 Kodak Transport Cleaning Sheets

896 5519 Staticide Wipes for Kodak Scanners

868 3724 Optics Cleaner Pad

125 1842 Portable USB Drive (5-pack)

186 0949 USB Replacement Connector

867 7288 Kodak A4 Flatbed Accessory

179 6747 Kodak A3 Flatbed Accessory

826 3006 Keyboard (English) and Stand Accessory

Kodak Service & Support

www.kodak.com/go/disupport

1.800.822.1414

(US&C only; all other regions, contact your local

Kodak Support Center)

When contacting support, have the following available:

• A description of your problem

• Scan Station serial number

Summary of content (2 pages)

PAGE 1
Cleaning the imaging area Indicator Lights The power button is illuminated blue when the Scan Station is on and ready. Following is a description of LED status: LED Remedy Steady blue Flashing blue Flashing or steady red Scan Station 500 Scan Station is on and ready to scan. Indicates the Scan Station is initializing from powering on or warming up and preparing to scan. Indicates a Scan Station error, such as the Scan Station cover is open. Supplies and Accessories CAT No.
PAGE 2
Cleaning the rollers Cleaning and replacing the separation module Cleaning and replacing the feed module IMPORTANT: The Roller Cleaning Pad contains sodium lauryl ether sulfate which can cause eye irritation. Refer to the MSDS for more information. For detailed cleaning and replacement procedures see Chapter 7, Maintenance in the Administrator’s Guide.