User Manual

7
Chapter 1
Turning On the Camera
1 Remove the lens cap.
If the lens cap is not removed, it comes
off automatically when you turn on the
camera.
2 Turn the Mode dial from Off to any other
position.
The ready light blinks green while the
camera performs a self-check.
When the ready light glows steady green,
the camera is ready to take pictures (or
videos, if the mode dial is set to ).
In Still and Video modes, a status bar
appears on the LCD.
Adjusting the Display
EasyShare
MENU
DELETE
REVI
Share
Ready light
Mode dial
OK
To Do This
Turn Liveview on so that the LCD can
be used as a viewfinder
Press the OK button. To turn it off,
press the OK button again.
Change the Liveview setting so that it
is on whenever the camera is on
See page 51.
Turn the status bar back on after it
times out
Press .
Turn off the camera
1 Turn the Mode dial to Off.
The camera completes
operations that are in process.
2 Replace the lens cap.