User Manual

Chapter 1

Setting the Date and Time

The Date & Time screen is displayed the first time you turn on the camera or if

the battery is removed for more than 10 minutes. If this is the first time the

camera has been turned on, go to Step 3.

To set the date and time after that:

1 Turn on the camera, then press the Menu

button.

2 Press to highlight Setup Menu, then

press the OK button.

3 Press to highlight Date & Time, then

press the OK button.

The date format is YYYY/MM/DD. The time

is displayed in a 24-hour format.

4 Press to adjust the date and time.

Press to move to the next setting.

5 When finished, press the OK button.

6 Press the Menu button to exit the menu.

The setting remains until you change it.

NOTE: Depending on your computer operating system, KODAK EASYSHARE

Software may allow your computer to automatically update the camera

clock when you connect the camera. See the KODAK EASYSHARE

Software Help for details.

EasyShare

DELETE

REVIE