User Manual

25
Chapter 2
Putting Yourself in the Picture
The Self Timer creates a 10-second delay between the time you press the
Shutter button and the time the picture is taken.
Turn on the Self Timer:
1 In any Still mode, press the Menu button.
2 Highlight Self Timer , then press the OK
button.
3 Highlight On, then press the OK button.
4 Press the Menu button to exit the menu.
Take the picture:
1 Place the camera on a flat surface or use a
tripod.
2 Compose the scene. Press the Shutter
button half-way to set the exposure and
focus, then continue pressing completely
down. Move into the scene.
The red Self Timer light blinks slowly for 8
seconds (then quickly for 2 seconds)
before the picture is taken.
The Self Timer turns off after the picture
is taken or if you change modes.
DX4330
EasyShare
Self Timer
light