User Manual

Chapter 2

Setting Long Time Exposure

Use Long Time Exposure to control how long the shutter stays open. Settings

are: None, 0.7, 1, 1.5, 2, 3, and 4 seconds.

NOTE: Long Time Exposure cannot be used with Exposure Compensation.

1 To avoid blurry pictures, place the camera on a flat, steady surface or use a

tripod.

2 In any Still mode, press the Menu button.

3 Highlight Long Time Exposure , then press the OK button.

4 Press to select an option.

5 Press the OK button to accept the change.

6 Press the Menu button to exit the menu.

7 Use the LCD to frame your subject. Press the

Shutter button half-way to set the focus,

then continue pressing completely down

to take the picture.

This setting remains until you move the

Mode dial or turn off the camera.

Available flash settings: Auto, Flash Off, Fill Flash, Red-eye

Default flash setting: Off

Camera returns to default: When you change modes or turn off the

camera.