User Manual

63
Chapter 9
Connecting the Camera Dock
After the KODAK EASYSHARE Software is loaded (see page 55), connect the
Camera Dock to your computer and to an external power source. You need:
m The USB cable included with your camera
m The AC power adapter, 7V included with the Camera Dock
IMPORTANT: Make sure your camera is NOT in the Camera Dock
when you are connecting to power and the computer.
1 Plug the labeled end of the USB cable
into the labeled USB port on your computer.
See your computer User’s Guide for details.
2 Plug the other end of the USB cable into the
square USB connector on the back of the
Camera Dock.
3 Plug the 7V AC adapter into the round
power connector on the back of the Camera
Dock and into a power outlet.
Your AC adapter may be different from
the one pictured or may have additional
plugs. Use the plug that accommodates
your type of power outlet.
Leave the Camera Dock connected to the
computer for easy transferring of pictures
and videos and for charging the Battery
Pack.
IMPORTANT: Use only the 7V AC adapter included with the Camera
Dock. Other adapters may cause damage to your
camera, Camera Dock, or computer.
D
C
IN
3
V