EasyShare 5300 All-in-One Printer User’s Guide
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2008 P/N 1K3237 Kodak and EasyShare are trademarks of Eastman Kodak Company. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks is under license. ©1989-2007 I.R.I.S.
Table of Contents Product overview..................................................................................................................................... 1 Main components............................................................................................................................................... 1 Control panel layout.......................................................................................................................................... 2 Status lights.......
Table of Contents Scan ........................................................................................................................................................ 63 Scan with control panel..................................................................................................................................63 Maintenance ......................................................................................................................................... 67 General care ..........
1 Product Overview Product overview The Kodak EasyShare 5300 All-in-One (AiO) Printer allows you to print, copy, and scan photos or documents. Many functions can be operated directly from the control panel. You can print, store, manage and share your digital photos with family members and friends with the Kodak EasyShare software. You can buy optional accessories to enhance your Kodak EasyShare AiO experience.
Chapter 1 Control panel layout Number Name Description 1 LCD display Displays photos, messages, status and menus. 2 Zoom + button When in Photo Preview mode, magnifies the photo to 1.5X. Subsequent presses zoom in 0.5X increments to a maximum of 5X. When in Multiview, displays the current photo in preview mode. 3 Proofsheet button When there are pictures on an inserted memory card or connected USB host device, pressing Proofsheet displays the Proofsheet menu.
Product overview Number Name Description 11 Attention light On or flashing for an error or warning condition. 12 Start button Starts a copy, print or scan operation. Flashes when busy. 13 Cancel button Cancels the current operation. Lit when Cancel or Set-up in progress. 14 4-way navigation button Used to navigate up a, down b, left _, and right `. 15 Menu button Displays the main menu screen. 16 Scan button Press to enter Scan mode. Lit when in Scan mode.
Chapter 1 Power light on power lead Light status Cause Action/Solution Power lead light is off. The printer to power supply lead is not properly connected to the power supply. Reseat the printer to power supply lead. The power supply to your wall outlet lead is not properly connected to your wall outlet. Reseat the power supply to your wall outlet lead. You do not have the appropriate power available at your wall outlet.
Product overview On/Off light Light status Cause Action/Solution Light is off. The printer is turned off. Press the On/Off button to turn the printer on. The Printer does not have power applied. Check the light on the power lead. The printer needs attention. Check to see if the photo tray light is on. If the photo tray light is on for more than 20 seconds and the On/Off light does not come on, disconnect the power for 5 seconds and reconnect the power.
Chapter 1 Photo tray status light Light status Cause Action/Solution Photo tray light is Off. The photo tray is not engaged. Push the photo tray in to engage it if you want to print 150 x 100 mm (6 x 4") pictures. The printer is not turned on. Press the On/Off button to turn the printer on. The photo tray is engaged. Pull the photo tray out to disengage it if you do not want to print 150 x 100 mm (6 x 4") pictures. The printer is powering up.
Product overview Attention light Light status Cause Action/Solution Light is off. No error. None Light is blinking steadily. Recoverable error. Paper jam while printing. Main tray empty. Photo tray empty. Carrier stall during pick. Media size mismatch. Media type mismatch. Paper jam during pick. Carrier stall while printing. Change colour ink cartridge. Change black ink cartridge. Colour ink cartridge not readable. Black ink cartridge not readable. Change both ink cartridges.
Chapter 1 Card slot light Light status Cause Action/Solution Light is off. An SD/MMC card is not inserted or is improperly inserted in the card slot. Remove and reinsert the SD/MMC card. Light is on. An SD/MMC card is properly inserted in the card slot. None Light blinks green. Slow blink: The internal card reader is initialising or communicating with the printer. None Fast blink: There is a card or communication error.
Product overview Default display settings Default settings are provided for each option. If you make changes to the settings, the changes remain as long as you do not change modes. You can save the settings in each mode by navigating to Save Settings and pressing OK. You may reset options to the master defaults by going to the main menu and selecting Reset Factory Defaults. Photos The LCD screen displays JPG images when you insert a memory card, camera, or USB device.
Chapter 1 Your EasyShare AiO also supports the following memory cards using Memory Stick and SD/MMC card slot adaptors, which you can purchase. Memory stick Duo miniSD MicroSD (TransFlash) The memory card light is a green LED located near the memory card slots. It lights up whenever you insert a memory card and flashes while the card is being read. The flashing serves as an indication to not remove the card while it is being read or written to, which could potentially damage the data on the card.
2 Getting started Getting started It is important to find a good location for your AiO printer. Place the printer on a clean, flat surface in a dry location and out of direct sunlight. Make sure the printer has proper ventilation. Avoid areas where ventilation ducts, open doors or high traffic might expose the EasyShare AiO and paper to high levels of dust and debris. Airborne particles can affect picture quality.
Chapter 2 4 Remove and discard the clear plastic casing and the orange protective cap. 5 Place the printhead into the carriage. 6 Push against the back wall of the printhead until it clicks into place. 7 Install the ink cartridges. Install ink cartridges After installing the printhead, you need to install the black and colour ink cartridges.
Getting started 1 Tear open the black ink cartridge bag at the notch and remove the ink cartridge. IMPORTANT: Insert the ink cartridge immediately to prevent any drying of the ink. 2 Remove and discard the orange cap. IMPORTANT: Handle ink cartridge carefully to avoid ink transfer. 3 Insert the black ink cartridge into the printhead. 4 Press down on the ink cartridge until you hear it snap into position. 5 Tear open the colour ink cartridge bag at the notch and remove the ink cartridge.
Chapter 2 7 Insert the colour ink cartridge into the printhead. 8 Press down firmly on the cartridge until you hear it snap into position. 9 Close the printer access door. NOTE: For the best quality prints, store ink cartridges in a location where the temperature does not exceed 30°C (85°F). Install the duplexer The Kodak EasyShare AiO supports an optional duplexer (Kodak EasyShare 5000 Series two-sided printing accessory) that enables printing on both sides of the paper.
Getting started 2 Insert the bottom of the duplexer into the printer and press the top in until it clicks. You can control how long the printer waits before a sheet is flipped by the duplexer with the AiO Home Centre (See General settings). Start-up When you power on your Kodak EasyShare All-in-One, status information is displayed on the LCD. After the start-up is complete, the EasyShare AiO enters Copy mode unless a photo device is attached.
Chapter 2 Ink levels OK Proofsheet OK Clean Printhead OK Calibrate printer OK Format Memory Card OK Print demo sheet OK Print diagnostic sheet Date and Time OK OK Print Proofsheet Scan Proofsheet Basic Clean Deep Clean Print Calibration Page Scan Calibration Page Formats inserted memory card. Prints a demonstration page. Prints a diagnostic page.
Getting started Photo button Layout _ or ` Borderless Bordered 2 per page 3 per page 4 per page 9 per page Index 2x2 poster 3x3 poster Quantity Colour Quality _ or ` _ or ` _ or ` 4x4 poster 1-99 Colour Black & white: Normal Best Save settings _ or ` Draft No Yes User’s Guide 17
Chapter 2 Copy button Quantity Colour Quality _ or ` _ or ` _ or ` 1-99 Black & white: Colour Normal Draft Output _ or ` Best Same Size Fit to Page Scale Percent Size _ or ` Photo Layouts Output = Scale Percent 10-500 Output = Photo Layouts Borderless Bordered 2 per page 3 per page 4 per page 9 per page Index 2x2 poster 3x3 poster Brightness Preview Save settings _ or ` _ or ` _ or ` 4x4 poster -3 to +3 No Yes (photo layouts only) No Yes Scan button Scan What Scan To _ or ` Document _ or `
Getting started Help button Installing Ink Cartridges Making a Copy Making a Photo Making a Scan Calibrating Printer OK OK OK OK OK Demo sheet You can print a page that demonstrates the functions and features of your Kodak EasyShare AiO printer. 1 Press Menu. 2 Press b until Print Demo Sheet is selected. 3 Press OK. 4 Press Start to begin printing. Transfer photos When you take photos with your digital camera, you can print them immediately or save them directly to your computer.
Chapter 2 select photos with your camera, the camera creates a DPOF file that identifies which photos have been tagged for printing. Your Kodak EasyShare AiO can read the DPOF file from the memory card in a camera so you do not have to re-select the photos to print. NOTE: Not all digital cameras allow you to tag your photos for printing. See your digital camera documentation to see if it supports tagging (DPOF).
Getting started 4 Press b until Add Date to Prints is selected. 5 Press _ or ` to enable or disable date printing. 6 Press OK. Button Sounds You can configure your EasyShare AiO to emit an audio feedback beep when you press a button on the control panel. The default setting is to beep. 1 Press Menu to display the main menu. 2 Press b until Control Panel Settings is selected. 3 Press OK. 4 Press _ or ` to enable or disable button sounds. 5 Press OK.
Chapter 2 Date and time Your Kodak EasyShare All-in-One contains a clock for stamping the date and time on scans to a memory card. 1 Press Menu to display the main menu. 2 Press b until Date and Time is selected. 3 Press OK to go to the Date and Time menu. 4 Press _ or ` to set the Year. 5 Press OK. 6 Press _ or ` to set the Month. 7 Press OK. 8 Press _ or ` to set the Day. 9 Press OK. 10 Press _ or ` to set the Hour. 11 Press OK. 12 Press _ or ` to set the Minute. 13 Press OK.
Getting started User’s Guide 23
Chapter 2 24 Kodak EasyShare 5300 AiO
3 Handling and loading paper Handling and loading paper Use the following guidelines when handling paper: To avoid fingerprints, handle the paper by the edges as much as possible. Avoid touching the glossy side of the photo paper. Keep the input and 150 x 100 mm (6 x 4") paper trays closed to keep out dust and debris. Store paper flat. Keep paper away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).
Chapter 3 You can copy or scan oversized originals by completely removing the lid from your EasyShare AiO. To remove the lid, lift the lid to the open position, grasp the sides of the lid and then pull the lid upwards. Your EasyShare AiO functions normally with the lid removed. Replace the lid by inserting the tabs on the hinge back into the appropriate slots. Load main tray You can load the main paper tray with various types of paper from 7.5 to 21.3 cm (3 to 8.5 inches) wide and 12.
Handling and loading paper 3 Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide the stack of paper forwards until it stops. 4 Slide the paper-width and paper-length guides inwards until they stop at the edges of the paper. 5 Lower the output tray. 6 Pull the extender tray out.
Chapter 3 Load photo tray You can load up to 20 sheets of 10 mil thick 150 x 100 mm (6 x 4") photo paper into the photo tray. TIP: To avoid fingerprints, handle the paper by the edges or by the perforated tabs. Avoid touching the glossy side of the paper. 1 Lift the photo tray lid. 2 Slide the photo tray towards you until it stops. NOTE: When the photo tray is disengaged, the main paper tray is active. 3 Insert the stack of photo paper into the photo tray, glossy side down.
Handling and loading paper 5 Close the photo tray lid. Load envelopes You can load plain envelopes into the main input tray of your Kodak EasyShare AiO. Do not use envelopes with cut-outs or cellophane windows. 1 Lift the output tray. 2 Remove any paper in the input tray. 3 Insert one or more envelopes face down with the envelope flaps to the left. 4 Slide the stack of envelopes forwards until it stops. 5 Slide the paper guides inwards against the stack of envelopes until they stop.
Chapter 3 6 Close the output tray. Load labels Use letter or A4 (designed for use with ink jet printers) label sheets. 1 Ensure that none of the pages are sticking together. 2 Place a stack of label sheets on top of standard paper in the input tray, label side down.
4 Print Print The memory card slots accept most of the popular memory cards (see Supported memory cards). When you insert a memory card into the card slot or connect a PTP camera or USB flash drive, the first photo is displayed on the LCD display. When you press the Photo button, the Photo Print menu is displayed. The Photo button toggles between displaying photos and the Photo Print menu. CAUTION You can only use one device (USB or memory card) from which to print.
Chapter 4 Two-sided printing You can print on both sides of the paper. Watermark You can select or create a background watermark. Print photos from a camera 1 Connect your camera to the EasyShare AiO. The PictBridge logo is displayed on the LCD. 2 Load the photo tray with photo paper (See Load photo tray in Chapter 3). 3 Use your camera to select and print photos.
Print Index print The purpose of an index print is to catalogue the contents of a memory card or USB flash drive. An index print contains the following: Sequence numbers for the relative position of each photo within the defined set of photos, incrementing from 001 and continuing progressively across all pages of a multi-page index print. 250 x 200 mm (10 x 8") index prints are 22 mm (7/8") wide with 3 mm (1/8") white space between photos. The filename is displayed below each thumbnail image.
Chapter 4 Print photos from a proofsheet A proofsheet is a simple and convenient way to select photos and make prints directly from a camera or memory card without the need for a computer. Proofsheet printing is a two-step process. In the first step, you connect a PTP camera or insert a memory card and print a proofsheet. In the second step, you select pictures to print from the proofsheet and then scan the proofsheet into the EasyShare AiO.
Print If a DPOF file is detected when you insert a memory card, the EasyShare AiO displays a message asking if you want to print tagged images. Bluetooth printing Bluetooth is a short-range radio technology that enables wireless connectivity between electronic devices.
Chapter 4 Panoramic photos Panoramic images are detected based on the aspect ratio of the image. A panoramic image is displayed in a "fit to page" manner with blank space above and below the image. The crop box is adjusted for a 300 x 100 mm (12 x 4") aspect ratio and initially encompasses the entire image. If panoramic images are selected for printing, the AiO printer prints all of the panoramic images after all other images have printed.
Print Layouts The photo layouts on your Kodak EasyShare AiO "snap" to the nearest standard print size whenever possible, based on the combination of layout and paper size loaded. Otherwise the layouts are based on a standard 75 x 50 mm (3 x 2") aspect ratio. The table below shows the print sizes that result from the various layouts when applied to US Letter size paper 275 x 213 mm (11 x 8.5"). Layout A paper print size Borderless 275 x 213 mm (11 x 8.
Chapter 4 38 Kodak EasyShare 5300 AiO
Print Set print layout 1 Press Photo. The Print menu is displayed with Layout selected. 2 Press _ or ` to change the print layout. 3 Press OK to set the selected layout and continue to set options, press Photo to preview or Start to print.
Chapter 4 125 x 88 mm (5 x 3.
Print 150 x 100 mm (6 x 4") paper 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page User’s Guide 41
Chapter 4 175 x 125 mm (7 x 5") paper 42 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page Kodak EasyShare 5300 AiO
Print 250 x 200 mm (10 x 8") paper 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page User’s Guide 43
Chapter 4 US Letter 44 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page Kodak EasyShare 5300 AiO
Print Panoramic User’s Guide 45
Chapter 4 A4 paper 46 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page Kodak EasyShare 5300 AiO
Print A5 paper 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page User’s Guide 47
Chapter 4 A6 paper 48 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page Kodak EasyShare 5300 AiO
Print B5 paper 1 per page borderless 1 per page bordered 2 per page 3 per page 4 per page 9 per page Setting print options Before you print photos, you may want to change the following default settings: Layout: Borderless Quantity: 1 print Colour: Colour print Quality: Normal Save settings: No User’s Guide 49
Chapter 4 The Photo Print menu contains parameters that allow you to specify other options. Set number of prints You can increase the number of prints of each photo from the Photo Print menu. The default is 1 print. 1 On the Print menu, select Quantity. 2 Press _ or ` to change the print quantity. 3 Press OK to set the selected layout and continue to set options, press Photo to preview or Start to print. Set Colour You can print in colour or black and white. Printing in colour is the default.
Print Previewing photos The Print Preview screen contains a crop box and displays the current photo number on the card or USB host device and the total number of photos on the card or device. It displays a checkbox indicating whether or not the currently displayed photo has been selected for printing. A checkmark is placed in the checkbox when the photo is selected, along with the number of copies to be printed.
Chapter 4 Zoom photos 1 Insert a memory card into the appropriate slot or a mass storage device into the USB port, or connect a digital camera to the USB port. The last photo is displayed. 2 Press Zoom + to enlarge the photo in .25X increments up to 5X magnification. Pressing Zoom – decreases magnification in .25X increments down to 1X. 3 Use the 4-way Navigation button to display the part of the picture you want to print. 4 Press OK when finished.
Print Multiview The Multiview screen shows thumbnails of nine photos. The current photo number and the total photo number are also displayed. 1 Insert a memory card into the appropriate slot or a mass storage device into the USB port, or connect a digital camera to the USB port. The last photo is displayed. 2 Press Zoom - to enter Multiview. The current photo is indicated by a red selection box. 3 Use the 4-way navigation button to move the red selection box to another photo.
Chapter 4 54 Kodak EasyShare 5300 AiO
5 Copy Copy The Kodak EasyShare AiO allows you to produce high-quality colour and black and white copies on a variety of paper types, including transparencies. Once copying has started, you may at any time abort a copy operation by pressing the Cancel button. Copy with control panel Pressing Copy displays the Copy menu where you can set copy options, preview copies after scanning and make copies.
Chapter 5 Same size copy The copy is the same size as the original and is the default copy setting. Cropping will occur if the original is larger than the paper size. The copy will contain white space if the original is smaller than the paper size. 1 Load your original face down on the front right-hand corner of the scanner glass. 2 Press Copy to display the Copy menu. 3 Press b to select Output. 4 Press _ or ` to select Same Size.
Copy 2 Press Copy to display the Copy menu. 3 Press b to select Output. 4 Press _ or ` to select Fit to Page. 5 If desired, make changes to the following copy options with the Copy menu: See Set number of copies See Set Colour See Set quality See Change brightness See Set preview 6 Press Start. If you turned preview on, the EasyShare AiO enters Preview mode; otherwise it starts making copies. Scale percent copy The default copy scale is 100%; however you can scale copies from 10% to 500%.
Chapter 5 Photo layout copy You can set the layout for making copies of photos on your Kodak EasyShare All-in-One. The following layouts are supported: Borderless (default) Bordered 2 per page 3 per page 4 per page 9 per page 2x2 poster 3x3 poster 4x4 poster 1 Place your original face down on the front right-hand corner of the scanner glass. 2 Press Copy to display the Copy menu. 3 Press b to select Output. 4 Press _ or ` to select Photo Layouts. 5 Press b to select Size.
Copy Setting copy options You can set the following copy options with the control panel Copy menu: Quantity Colour Quality Output/Size (See Same Size Copy, Fit to Page Copy, Scale Percent Copy or Photo Layout Copy) Brightness Preview Save Settings Set number of copies You can set the number of copies to make from the Copy menu. The default is 1 copy. 1 On the Copy menu, select Quantity. 2 Press or hold _ or ` to change the number of copies you want to make.
Chapter 5 Change brightness You can change the brightness of copies, with -3 being the darkest and +3 the lightest. 1 If the Copy menu is not displayed, press Copy. 2 Press b until Brightness is selected. 3 Press _ to darken or ` to lighten. 4 Press OK to set and continue setting options or Start to copy. Set preview Copy Preview allows you to preview your originals before making copies. The Copy Preview screen shows the scanned image that you can zoom or crop (see Zoom and crop).
Copy Zoom and crop To zoom and crop a photo before making a copy, you must be in Preview mode (see Turning copy preview on). 1 With Preview set to Yes on the Copy menu, press Start to enter Preview mode. The photo on the glass is scanned and displayed with a crop box. 2 Press Zoom + to enlarge the photo in .25X increments up to 5X magnification. Pressing Zoom – decreases magnification in .25X increments down to 1X. 3 Use the 4-way navigation button to display the part of the picture you want to copy.
Chapter 5 62 Kodak EasyShare 5300 AiO
6 Scan Scan You can start a scan from either the Kodak AiO control panel or your computer. Scan with control panel Pressing Scan places the Kodak EasyShare AiO in Scan mode and displays the Scan menu on the screen. Save scan settings When you change scan settings from the control panel, the settings apply only to the current scan job. To apply scan settings to all future scan jobs, you can save your changes. 1 Press Scan to display the Scan menu. 2 Change the desired Scan settings.
Chapter 6 Scan to application The Home Centre software enables you to maintain a list of scan destination applications. 1 Place a photo or photos face down on the scanner glass. 2 Press Scan to display the Scan menu. 3 Press _ or ` to select Photo. 4 Press b to select Scan To. 5 Press ` to select Application. 6 Press b to until Application is selected. 7 Press _ or ` to select another application. 8 Press Start. Scan to memory card 1 Insert a memory card into the appropriate card slot.
Scan 2 Press Scan to display the Scan menu. 3 Press _ or ` to select Document. 4 Press Start. The document is scanned and saved based on the Kodak AiO Home Centre scan document settings (see Scan document settings). Scan to application 1 Load your original face down on the front right-hand corner of the scanner glass. 2 Press Scan to display the Scan menu. 3 Press _ or ` to select Document. 4 Press b to select Scan To. 5 Press _ or ` to select Application. 6 Press b to until Application is selected.
Chapter 6 Scan to memory card 1 Insert a memory card into the appropriate card slot. WARNING Never attempt to remove a memory card while it is being accessed. Doing so may damage files on the card. You can safely remove a card only when the status light next to the slots is not blinking. 2 Load your original face down on the front right-hand corner of the scanner glass. 3 Press Scan to display the Scan menu. 4 Press _ or ` to select Document. 5 Press b to select Scan To.
7 Maintenance Maintenance The Kodak EasyShare All-in-One requires little maintenance. However, you should clean the glass and lid backing to remove dust and fingerprints. Fingerprints and other debris on the glass or lid backing could slow down performance and affect the accuracy of scanning. This section covers the Settings menu, printhead installation, printhead calibration, checking ink levels and changing ink cartridges. General care IMPORTANT: Always disconnect the power before cleaning.
Chapter 7 Clean the scanner glass To ensure that your copies and scans remain clear, keep the scanner glass and lid backing clean and dust the exterior. 1 Turn off the EasyShare AiO and raise the lid. 2 Clean the glass with a soft cloth or sponge slightly moistened with a non-abrasive glass cleaner. WARNING Do not use abrasives, acetone, benzene or carbon tetrachloride on the glass, as they can damage it. Do not place or spray liquid directly on the glass.
Maintenance Print diagnostic sheet The diagnostic page contains information about your printer that can be useful when contacting Kodak support. 1 Press Menu. 2 Press b until Print Diagnostic Sheet is selected. 3 Press OK. 4 Press Start to begin printing. Firmware upgrade You can update the firmware in your EasyShare AiO with the most recent available from the Home Centre software. This requires an Internet connection. 1 Click the Help button to open the Help panel.
Chapter 7 Replace ink cartridges A Low Ink warning message is displayed when one of the ink levels drops below 20 percent. NOTE: For the best quality prints, store ink cartridges in a location where the temperature does not exceed 30°C (85°F). WARNING Generic or non-Kodak ink cartridges may not function in the KODAK EASYSHARE All-in-One Printer. Kodak recommends using Kodak ink cartridges.
Maintenance 4 Remove the bagged ink cartridge from the box and tear open the bag at the notch and remove the ink cartridge. IMPORTANT: Insert the ink cartridge immediately to prevent any drying of the ink. 5 Remove the orange cap from the cartridge by grasping the top edge and pulling/rotating it off the ink cartridge. 6 Slide the ink cartridge into the printhead. 7 Press down on the tab until you hear a click and feel the latch snap into position. 8 Close the printer access door.
Chapter 7 Printhead The printhead dispenses the ink from the ink cartridges onto the paper. Printer maintenance involves: Calibration Clean the printhead Calibration The Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints.
Maintenance To clean printhead from control panel 1 Press Menu to display the main menu. 2 Press b until Clean Printhead is selected. 3 Press OK to go to the Clean Printhead menu. 4 Press OK to perform a Basic Clean. or Press b to select Deep Clean and press OK to perform a Deep Clean.
Chapter 7 74 Kodak EasyShare 5300 AiO
8 Support Support If you have a problem with your AiO printer, refer to the troubleshooting topics in this book. Additional technical information is available in the ReadMe file located on the Kodak EasyShare software CD. For online support, visit www.kodak.com/go/support. Contact Kodak Kodak Resource Centre www.kodak.com/go/resourcecenter Printer Get support for your product (FAQs, troubleshooting information etc.). www.kodak.
Chapter 8 Limited warranty coverage Warranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the authorised service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein.
Support Outside the United States and Canada In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage or loss may be by negligence or other act. EASTMAN KODAK COMPANY Rochester, NY 14650 U.S.A.
Chapter 8 Customer support phone numbers Australia 1 800 793 895 Austria 0179 567 357 Belgium 02 713 14 45 Brazil 1 800 891 4213 Canada 1 800 465 6325 Denmark 3 848 71 30 Finland 0800 1 17056 France 01 55 1740 77 Germany 069 5007 0035 International Toll Fax +44 131 458 6962 International Toll Line +44 131 458 6714 Ireland 01 407 3054 Italy 02 696 33452 Japan 03 5540 9000 Mexico 01 800 288 5632 Netherlands 020 346 9372 New Zealand 0800 880 175 Norway 23 16 21 33 Portugal
Support Bluetooth device not recognised Probable cause 1 The internal Bluetooth radio in the device may be turned off. Corrective action Make sure the device is on and within range of the Bluetooth radio signal (10 metres or 30 feet). NOTE: The Bluetooth technology-enabled device must use a BIP, OPP or FTP profile. Probable cause 2 Sending device requires a PIN. Corrective action Enter a PIN of 1111 into the sending device.
Chapter 8 1 Disengage the photo tray. 2 Remove the paper from the paper tray(s). Carefully "fan" the paper to keep the sheets from sticking together. 3 Reload the paper tray(s). Do not overfill. 4 Re-engage the photo tray, then press Start to resume printing. No communication with computer Your EasyShare AiO is not connected to your computer. 1 Make sure you are using a 2.0 USB cable. 2 Check the connection from your computer to your AiO printer.
Support 4 Reload the paper tray(s). Do not overfill. 5 Engage the photo tray, if printing 150 x 100 mm (6 x 4") photos, then press Start to resume printing. Paper jam The paper did not advance or was not picked properly from the paper tray. 1 Open the paper trays and remove the paper supply. 2 Press in the latches on the rear access door and remove it. 3 Pull the paper out from the rollers without tearing it.
Chapter 8 2 Check the power and USB connections from the printer to the computer. 3 If you are trying to transfer pictures from a memory card and a PictBridge camera is connected, remove it. 4 Close unnecessary software applications and minimise remaining application windows. Follow any messages on the screen that may have been hidden by other windows. 5 Disconnect then reconnect the USB cable from the printer to the computer. 6 Make sure you are using a 2.0 USB cable.
Support PictBridge camera not detected 1 Check the USB connections from the PictBridge compatible camera or device to the printer. 2 If disconnected, reconnect the USB cable from the PictBridge compatible camera or device to the printer. 3 Make sure there is at least one picture in the PictBridge compatible camera or the device's internal memory or memory card. 4 Make sure the connected camera or device is PictBridge compatible. See your camera or device user guide for details.
Chapter 8 Load only one type of paper. Print spotted Paper may be dirty. Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the paper tray and load new paper. NOTE: Keep paper tray covers closed to keep dust and debris from collecting on the paper or inside the printer. Print too dark Try re-taking the picture with the flash on or move within the flash range of the camera. See your camera user guide for details.
Support Check the paper. 1 Disengage the photo tray if engaged. 2 Check the paper access on the back of the printer. 3 Remove any loose paper from the printer. 4 Inspect the paper supplies and reload with new paper if necessary. 5 Carefully "fan" the paper to keep the sheets from sticking together. 6 Reload the paper trays. Do not overload. 7 Re-engage the photo tray, if desired, and then press Start to resume printing.
Chapter 8 Copies too light or dark The brightness setting for copies is set too light or dark. Adjust the brightness setting for copies. See Change brightness or Copy settings. Copy cut off The original is larger than the paper loaded. When the original is larger than the paper loaded, use the Fit to Page option to reduce your original to the size of the paper loaded. Scan troubleshooting Scan fails Probable cause 1 Your computer is not turned ON. Turn on your computer.
Support Scanned image blank Your original is not placed correctly on the scanner glass. Place your original face down on the front right-hand corner of the scanner glass. Proofsheet scan unsuccessful Probable cause 1 The scanner glass is dirty. Make sure the scanner glass is completely clean or the proofsheet might not scan properly (see Clean the scanner glass). Probable cause 2 Memory card or camera changed.
Chapter 8 88 Kodak EasyShare 5300 AiO
9 Appendix Appendix All-in-One specifications B&W plain paper print speed (Draft/Normal/Best) 32 / 10.5 / 5 ppm Colour plain paper print speed (Draft/Normal/Best) 22 / 6 / 3 ppm Photo print speed - 4X6 Kodak Studio Gloss Photo print speed - 8X10 Kodak Studio Gloss 2.14 ppm [28 sec/print] 0.86 ppm [70sec/print] B&W plain paper copy speed (Draft/Normal/Best) 30 / 10 / 5 ppm Colour plain paper copy speed (Draft/Normal/Best) 20 / 6 / 3 ppm Scan Resolution 1200 dpi Size 18.8”W x 14.7”D x 8.
Chapter 9 Computer requirements Requirement Minimum Recommended Operating system XP SP1 XP SP2, XP 64, Vista CPU Celeron Pentium 4 Clock speed 1.2 GHz 3 GHz Memory 128 MB 512 MB Available disk space 200 MB 200 MB Monitor resolution 800 x 600 pixels 1024 x 768 pixels Colour depth 16 bit 24 bit Interface USB 1.1 USB 2.0 Removable drive CD-ROM CD-ROM Paper types The following tables show the paper types and sizes that the Kodak EasyShare AiO supports for copying and printing.
Appendix Supported paper sizes Usage Size Tray Document page sizes Labels A4 (297 x 210 mm) (11.8 x 8.4") A5 (210 x 148 mm) (8.4 x 5.9") A6 (148 x 105 mm) (5.9 x 4.2") US Executive (263 x 181 mm) (10.5 x 7.25") US Legal (350 x 213 mm) (14 x 8.5") US Letter (275 x 213 mm) (11 x 8.5") Custom sizes Main Index card stock 76.2 x 127 mm index cards (5 x 3") 101 x 152 mm index cards (6 x 4") 127x178 mm index cards (7 x 5") Main Transparency Iron-on transfers A4 (297 x 210 mm) (11.8 x 8.
Chapter 9 Safety Read and follow these cautions and warnings before using KODAK products. Always follow basic safety procedures. Follow all warnings and instructions marked on the equipment. Parts CAUTION Do not disassemble this product; there are no user-serviceable part(s) inside. Refer servicing to Kodak qualified service personnel. WARNING Keep out of reach of children. Ink is harmful if swallowed.
Appendix CAUTION Do not use your EasyShare AiO near water or spill liquid on it. WARNING Do not place your EasyShare AiO on an unstable cart, stand, bracket or table. Injury to persons and damage to the equipment may occur. Environment CAUTION Excessive dust levels may damage internal parts. CAUTION Unplug the equipment from the wall outlet before cleaning.
Chapter 9 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.
Appendix does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. This equipment is designed for DTMF tone dialling and loop disconnect dialling. In the unlikely event of problems with loop disconnect dialling, it is recommended to use this equipment only with the DTMF tone dial setting.
Chapter 9 96 Kodak EasyShare 5300 AiO
Glossary Glossary A ADF: Automatic Document Feeder AES: Advanced Encryption Standard C CHAP: Challenge Handshake Authentication Protocol D dBa: Decibel measured with a "weighting filter" dBm: A measured power level in decibels relative to 1 mW. Dongle: A small electronic device that plugs into a USB port. DPOF: Digital Print Order File - An ASCII order file that you can generate in a camera that supports DPOF. DPOF files enable you to request simple reprints of the photos in the file.
Glossary W WEP: Wired Equivalent Privacy Wi-Fi: Wireless Fidelity WLAN: Wi-Fi Local Area Network WPA: Wi-Fi Protected Access 98 Kodak EasyShare 5300 AiO
Index Index 2 2-sided printing accessory ......................................14 A A6 paper......................................................................48 Audio feedback........................................................... 21 B B5 paper.......................................................................49 Bluetooth .............................................................. 35, 79 Borderless ................................................................... 85 Brightness .............
Index Quantity................................................................50, 59 R Requirements .............................................................90 Reset............................................................................. 22 S Safety............................................................................ 92 Same Size .................................................................... 56 Sample page ...............................................................